View Listing

New 2020 MacDon FD1 FlexDraper Header Header - Draper

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1055104
  • Stock #: 1605554
  • Location: Vegreville, Alberta

35 ft. (10.7 m) Single Knife Drive FlexDraper Header; FM100 Fully Assembled for NH CR/CX~Models: CR 9X0, 90X0, X090, X080, X.90, X.80  ;   CX 8X0, 80X0, 8.X0. See also the Required Component Section below. New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 35' & larger headers. NH kit #84060212. New Holland combines with 10 volt AHHC systems require B6421 - New Holland 10 Volt Auto Header Height Control Converter Kit. Dealer to confirm combine configuration when ordering. For standalone FM100, order B6129; Driveline for 2017 and Newer Combines - 21 Tooth Spline Driveline; Stabilizer Wheels / Slow Speed Transport Packages~Slow Speed Transport must not exceed 20 MPH (32 km/h).; For 35' (10.7 m) Header; For CNH Combines - New Holland and Case Combines with Console Rail Only; 35' (10.7 m) SK - Coarse Serration; Auto Lateral Tilt AHHC Kit~Allows combine lateral tilt to work with AHHC.; Multi-Crop Rapid Reel Conversion Kit - Standard Reel Arm~Used for changing between standard and short reel arm lengths.  Need short reel arm braces (sold separately).; Short Brace Kit of Center Reel Arm for Double Span Reel Headers~Required to move reel to the rear fore/aft range (canola position).

Webb's Machinery (Vermilion) Ltd. , Vegreville, Alberta

View Listing
View Listing

New 2020 MacDon FD140 Header Combine

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1055044
  • Stock #: 14910
  • Location: Lamont, Alberta

40 ft. (12.2 m) Double Knife Drive FlexDraper Header; FM100 Fully Assembled for NH CR/CX~Models: CR 9X0, 90X0, X090, X080, X.90, X.80  ;   CX 8X0, 80X0, 8.X0. See also the Required Component Section below. New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 35' & larger headers. NH kit #84060212. New Holland combines with 10 volt AHHC systems require B6421 - New Holland 10 Volt Auto Header Height Control Converter Kit. Dealer to confirm combine configuration when ordering.; Driveline for 2017 and Newer Combines - 21 Tooth Spline Driveline; Stabilizer Wheels / Slow Speed Transport Packages~Slow Speed Transport must not exceed 20 MPH (32 km/h).; 40' (12.2 m) DK - Coarse Serration; For 40' (12.2 m) Header; For CNH Combines - New Holland and Case Combines with Console Rail Only; Short Brace Kit of Center Reel Arm for Double Span Reel Headers~Required to move reel to the rear fore/aft range (canola position).; Multi-Crop Rapid Reel Conversion Kit - Standard Reel Arm - Double Reel Only~Used for changing between standard and short reel arm lengths.  Need short reel arm braces (sold separately).; Auto Lateral Tilt AHHC Kit~Allows combine lateral tilt to work with AHHC.

Webb's Machinery (Vermilion) Ltd. , Lamont, Alberta

View Listing
View Listing

New 2020 MacDon FD140 Header Combine

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1055018
  • Stock #: 14364V
  • Location: Vegreville, Alberta

40 ft. (12.2 m) Double Knife Drive FlexDraper Header; FM100 Fully Assembled for NH CR/CX~Models: CR 9X0, 90X0, X090, X080, X.90, X.80  ;   CX 8X0, 80X0, 8.X0. See also the Required Component Section below. New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 35' & larger headers. NH kit #84060212. New Holland combines with 10 volt AHHC systems require B6421 - New Holland 10 Volt Auto Header Height Control Converter Kit. Dealer to confirm combine configuration when ordering.; Driveline for 2016 and Older Combines - 6 Tooth Spline Driveline; 40' (12.2 m) DK - Coarse Serration; For 40' (12.2 m) Header; For 40' (12.2 m) & 45' (13.7 m) Headers; For CNH Combines - New Holland and Case Combines Cab Draper Control; Short Brace Kit of Center Reel Arm for Double Span Reel Headers~Required to move reel to the rear fore/aft range (canola position).; Multi-Crop Rapid Reel Conversion Kit - Standard Reel Arm - Double Reel Only~Used for changing between standard and short reel arm lengths.  Need short reel arm braces (sold separately).; Stabilizer Wheels / Slow Speed Transport Packages~Slow Speed Transport must not exceed 20 MPH (32 km/h).

Webb's Machinery (Vermilion) Ltd. , Vegreville, Alberta

View Listing
View Listing

New 2019 MacDon D130XL Windrower

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1055009
  • Stock #: 13644
  • Location: Lamont, Alberta

30' D130XL MD NA M1SP DK HDS XL; Slow Speed Transport XL

Webb's Machinery (Vermilion) Ltd. , Lamont, Alberta

View Listing
View Listing

New 2019 MacDon R116 Header - Rotary

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1055004
  • Stock #: 13440
  • Location: Lamont, Alberta

R116SC 16' R116 For M1170 NA Steel; Tall Crop Dividers-BNG Rotary

Webb's Machinery (Vermilion) Ltd. , Lamont, Alberta

View Listing
View Listing

New 2018 MacDon M1240 Windrower

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1055001
  • Stock #: 13352
  • Location: Lamont, Alberta

M1240 Dual Direction™ Deluxe Cab; Bar 600-65R28 (Radial); Forked Casters with Suspension - Standard Tire Size 16.5L- 16.1; Initial Rear Ballast Package 1 - 360 lbs~Refer to the M1 Series Float Spring and Rear Ballast Requirements Chart page for requirements for each header configuration.; Additional Rear Ballast Package 2 - 360 lbs Each~Up to qty 2 per machine. Refer to the M1 Series Float Spring and Rear Ballast Requirements Chart page for requirements for each header configuration.; Disc Drive Quick Coupler Fittings~For M1240 equipped for rotary disc headers only. M1240 Rotary Disc Only comes from factory with hard plumb connection to R85, B6277 - Disc Drive Quick Coupler kit replaces hard plumb connection with quick couplers. If M1240 is equipped for rotary only, and quick removal of R85 header is desired, must order 2 x B6277. If M1240 is configured as rotary disc and draper ready, only 1 x B6277 is required for quick removal of R85 header.; EZ-Pilot Ready~Includes hardware and mounting for EZ-Pilot.

Webb's Machinery (Vermilion) Ltd. , Lamont, Alberta

View Listing
View Listing

New 2017 MacDon MDAB6364 Miscellaneous

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1054981
  • Stock #: 11883
  • Location: Vermilion, Alberta

D65/FD75 DRIVELINE -- INVOICE: 279446

Webb's Machinery (Vermilion) Ltd. , Vermilion, Alberta

View Listing
View Listing

New 2017 MacDon B5825 Windrower

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1054978
  • Stock #: 11689
  • Location: Lamont, Alberta

Tine Tube Re-Inforcement Kit

Webb's Machinery (Vermilion) Ltd. , Lamont, Alberta

View Listing
View Listing

New 2017 MacDon B5825 Windrower

Contact dealer for price


Recently Added

  • AgDealer Equipment #: 1054979
  • Stock #: 11690L
  • Location: Lamont, Alberta

Webb's Machinery (Vermilion) Ltd. , Lamont, Alberta

View Listing
View Listing

New 2021 MacDon FD140 Header Combine

$154,497.00 CAD / $123,370.60 USD


Recently Added

  • AgDealer Equipment #: 1054955
  • Stock #: NEO9P065
  • Location: Saskatoon, Saskatchewan

40 ft. (12.2 m) Double Knife Drive FlexDraper Header~Also comes with: Double width Reel Span - 2 reels connected mid header - 3 reel lift arms, 5 Reel Bats, 2 Outboard Skid Shoes  - factory installed, 4 Inboard Skid Shoes - factory installed.; FM100 Fully Assembled for NH CR/CX~Models: CR 9X0, 90X0, X090, X080, X.90, X.80  ;   CX 8X0, 80X0, 8.X0. See also the Required Component Section below. New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 35' & larger headers. NH kit #84060212. New Holland combines with 10 volt AHHC systems require B6421 - New Holland 10 Volt Auto Header Height Control Converter Kit. Dealer to confirm combine configuration when ordering. For standalone FM100, order B6129.; Driveline for 2016 and Older Combines - 6 Tooth Spline Driveline; Stabilizer Wheels / Slow Speed Transport Packages~For 30' (9.1 m), 35' (10.7 m), 40' (12.2 m), 45' (13.7 m). Slow Speed Transport must not exceed 20 MPH (32 km/h).; For 40' (12.2 m) Header; 21T Driveline -- 40 feet

Robertson Implements , Saskatoon, Saskatchewan

View Listing
View Listing

New 2021 MacDon FD140 Header Combine

$154,497.00 CAD / $123,370.60 USD


Recently Added

  • AgDealer Equipment #: 1054956
  • Stock #: NEO9P066
  • Location: Saskatoon, Saskatchewan

40 ft. (12.2 m) Double Knife Drive FlexDraper Header~Also comes with: Double width Reel Span - 2 reels connected mid header - 3 reel lift arms, 5 Reel Bats, 2 Outboard Skid Shoes  - factory installed, 4 Inboard Skid Shoes - factory installed.; FM100 Fully Assembled for NH CR/CX~Models: CR 9X0, 90X0, X090, X080, X.90, X.80  ;   CX 8X0, 80X0, 8.X0. See also the Required Component Section below. New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 35' & larger headers. NH kit #84060212. New Holland combines with 10 volt AHHC systems require B6421 - New Holland 10 Volt Auto Header Height Control Converter Kit. Dealer to confirm combine configuration when ordering. For standalone FM100, order B6129.; Driveline for 2016 and Older Combines - 6 Tooth Spline Driveline; Stabilizer Wheels / Slow Speed Transport Packages~For 30' (9.1 m), 35' (10.7 m), 40' (12.2 m), 45' (13.7 m). Slow Speed Transport must not exceed 20 MPH (32 km/h).; For 40' (12.2 m) Header; 21T Driveline -- 40 feet

Robertson Implements , Saskatoon, Saskatchewan

View Listing
View Listing

Used 2018 MacDon FD140 Header - Draper

$90,000.00 CAD / $71,867.76 USD


  • AgDealer Equipment #: 1054344
  • Stock #: M12010
  • Location: Yorkton, Saskatchewan

Cross auger, slow speed transport, LEX Adaptor Stock #M12010

Canada West Harvest Centre , Yorkton, Saskatchewan

View Listing