View Listing

Used 2015 MacDon FD75 FLEXDRAPER Draper Head

$73,000.00 CAD / $55,256.98 USD


  • Stock #: 40255A
  • Location: Wainwright, Alberta

*End Finger Kit for Pickup Reel for Lodged Crop~Includes 3/side. End Finger Kit is not required for canola and cereal grain conditions. They are specifically designed for heavy green forage and rice conditions. Excessive wrapping or end panel damage may occur if they contact the deflector.; *40' to 45' Upper Cross Auger; *40' & 45' Rock Retarder Kits; *40 Ft. (12.2 m) Double Knife Drive Draper Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels (30', 35', 40', 45' ONLY); *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. SERIAL NUMBER 279402-15; *No Slow Speed Header Transport; *FD75-40' FlexDraper Header

Tri-Ag Implements Ltd. , Wainwright, Alberta

View Listing
View Listing

Used 2016 MacDon FD75-40 Header

$88,000.00 CAD / $66,611.16 USD


  • Stock #: 40256A
  • Location: Wainwright, Alberta

Double Knife; Slow Speed Transport; Stabilizer Wheels; Upper Cross Auger; *# of Reel Bats; *Combine Mounting Adapter; *Cutterbar-Rigid/Flex; *Header Height Sensing; *Reel Drive; *Sickle-Single/Double; *Tine Material; *Width in Feet; *Spare knife; *CR/CX Combine Adapter

Tri-Ag Implements Ltd. , Wainwright, Alberta

View Listing
View Listing

Used 2017 MacDon FD75-45 Header

$95,000.00 CAD / $71,909.77 USD


  • Stock #: 40260A
  • Location: Consort, Alberta

Slow Speed Transport; Stablizer Wheels; Upper Cross Auger; *European Small Seed Kit

Tri-Ag Implements Ltd. , Consort, Alberta

View Listing
View Listing

Used 2013 MacDon FD75-45 Header

$69,000.00 CAD / $52,229.20 USD


  • Stock #: 40252A
  • Location: Consort, Alberta

Slow Speed Transport; Stablizer Wheels; Upper Cross Auger; *540 PTO Shaft; *European Small seed kit

Tri-Ag Implements Ltd. , Consort, Alberta

View Listing
View Listing

Used 2014 MacDon D65-40' Draper Head

$59,000.00 CAD / $44,659.75 USD


  • Stock #: 40257A
  • Location: Wainwright, Alberta

*D65 40' Header; *C1997-2014 Slow Speed transport; *Trasport INFO PKG Slow SPD MD; *Transport Supporters 256116-14; *TRANSPORT TOW POLE; *TRANSPORT LIGHTS NA/AUS; *STABILIZER WHEELS; *40FT D60/FD70 U.C AUGER; *CTRSKIDSHOES; *CENTER SKID SHOES D65/FD75; *LODGED CROP FINGER KIT; *STABILIZER WHEELS

Tri-Ag Implements Ltd. , Wainwright, Alberta

View Listing
View Listing

Used 2014 MacDon D65-40' Draper Head

$59,000.00 CAD / $44,659.75 USD


  • Stock #: 40262A
  • Location: Wainwright, Alberta

*D65 40' Header; *C1997-2014 Slow Speed transport; *Trasport INFO PKG Slow SPD MD; *Transport Supporters 252791-14; *TRANSPORT TOW POLE; *TRANSPORT LIGHTS NA/AUS; *STABILIZER WHEELS; *40FT D60/FD70 U.C AUGER; *CTRSKIDSHOES; *CENTER SKID SHOES D65/FD75; *LODGED CROP FINGER KIT; *STABILIZER WHEELS

Tri-Ag Implements Ltd. , Wainwright, Alberta

View Listing
View Listing

Used 2016 MacDon FD75-45' FLEXDRAPER Draper Head

$85,000.00 CAD / $64,340.32 USD


  • Stock #: 40250A
  • Location: St. Paul, Alberta

*FD75-45' Flex Header; *45 Ft. (13.7 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. B5747 - Rigid Header/Adapter Quick Coupler Kit is not compatible with FD75 FlexDraper headers. B5847 - required on Belgian made CR9090 which use 10V AHHC.; *40' & 45' Rock Retarder Kit; *Stabilizer Wheels / Slow Speed Transport~For 30', 35', 40', 45'. NOTE: for slow speed towing behind a Combine or Pick-up ONLY - do not exceed 25 MPH (40 km/h). Transport MUST not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.

Tri-Ag Implements Ltd. , St. Paul, Alberta

View Listing
View Listing

Used 2014 MacDon D65-40' Draper Head

$59,000.00 CAD / $44,659.75 USD


  • Stock #: 40258A
  • Location: Consort, Alberta

*D65 40' Header; *C1997-2014 Slow Speed transport; *Trasport INFO PKG Slow SPD MD; *Transport Supporters 252456-14; *TRANSPORT TOW POLE; *TRANSPORT LIGHTS NA/AUS; *STABILIZER WHEELS; *40FT D60/FD70 U.C AUGER; *CTRSKIDSHOES; *CENTER SKID SHOES D65/FD75; *LODGED CROP FINGER KIT; *STABILIZER WHEELS

Tri-Ag Implements Ltd. , Consort, Alberta

View Listing
View Listing

Used 2016 MacDon FD75 45'FLEXDRAPER Draper Head

$85,000.00 CAD / $64,340.32 USD


  • Stock #: 40251A
  • Location: Consort, Alberta

*FD75-45' Flex Draper Header; *45 Ft. (13.7 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. B5747 - Rigid Header/Adapter Quick Coupler Kit is not compatible with FD75 FlexDraper headers. B5847 - required on Belgian made CR9090 which use 10V AHHC.; *40' & 45' Rock Retarder Kit; *Stabilizer Wheels / Slow Speed Transport~For 30', 35', 40', 45'. NOTE: for slow speed towing behind a Combine or Pick-up ONLY - do not exceed 25 MPH (40 km/h). Transport MUST not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.

Tri-Ag Implements Ltd. , Consort, Alberta

View Listing
View Listing

Used 2011 MacDon M150 Windrower / Swather

$96,900.00 CAD / $73,347.97 USD


  • Stock #: 207434
  • Location: Humboldt, Saskatchewan
  • Hours: 1162

2011 MacDon M150 w/ MacDon D60D Head, 40', Fore/Aft, Double Knife, Vertical Knives, Keer Shears, Cross Auger, 1800 Display, SF1, ITC Receiver, ATU 200, Hydraulic Roller, Steering Tires 16.5-16.1 Goodyear 90% Rem., Drive Tires 600/65R28 Goodyear 90% Rem., Transport, -- 208180-11 chassis , 210408-11 header; 843 cutting hours; Conditioner: None; cross auger, transport, double knife drive, hydr roller, keer sheers; Head: Grain Head; in field working, straight shedded unit; Platform Size: 40

Pattison Agriculture , Humboldt, Saskatchewan

View Listing
View Listing

Used 2014 MacDon D65-35 Header

$42,000.00 CAD / $31,791.69 USD


  • Stock #: 139731
  • Location: Balzac, Alberta
  • Hours: 1

35', SLOW SPEED TRANSPORT, LODGED CROP FINGERS, HYD TILT, AHHC, .

Rocky Mountain Equipment , Balzac, Alberta

View Listing
View Listing

Used 2014 MacDon D65-35 Header

$42,000.00 CAD / $31,791.69 USD


  • Stock #: 139729
  • Location: Balzac, Alberta
  • Hours: 1

35', SLOW SPEED TRANSPORT, LODGED CROP FINGERS, HYD TILT, AHHC, .

Rocky Mountain Equipment , Balzac, Alberta

View Listing