$11,000 CAD / $8,066 USD
Recently Added
1999 John Deere 566 5X6 Round Baler John Deere 566 5x6 round baler, with 13,143 bales showing on monitor (monitor has been replaced). Twine, hydraulic pickup, and gauge wheels. 1 3/8 21 spline CV shaft. For more info contact Sales 403-553-0000, or by email. Can arrange delivery. Financing available.
$13,500 CAD / $9,900 USD
2015 Tubeline Bale Boss 1 3810 Bale Spreader Tubeline Bale Boss 1 3810 skidsteer mounted bale processor. Will handle a 3’x4’x8’ bale. Has male/female flat faced couplers. Fully hydraulic machine. For more info contact Sales 403-553-000, or by email. Can arrange delivery.
$2,400 CAD / $1,760 USD
HLA QE588 5 Prong Bale Spear HLA 5 prong bale spear, used for large square bales, and round bales. Can be fitted to any q-tach, or pin on loader. Comes with 5 49” BPT tines, and 2 14” stabilizer pins (can be removed -$85). Remove the center tine, and spear will work well for handling 2, or 3 round bales. • Frame Width of 88” • Frame Height of 74” In stock models listed below. • Skidsteer Q-Tach $2,400 • Alo/Euro/Global Q-tach $2,400 • John Deere 600/700 Q-Tach $2,590 • John Deere H480 Q-Tach $2,590 • JCB 530 Q-Tach $2,720 • Manitou Q-Tach $2,720 • Volvo 50 Q-Tach $2,980 • JRB 416 Q-Tach $3,190 For more info contact John 403-553-0000, or by email. Can arrange delivery.
$1,050 CAD / $770 USD
HLA TE5049 3 Prong Bale Spear HLA 3 prong bale spear, used for large square bales, and round bales. Can be fitted to any q-tach, or pin on loader. Comes with 3 49” BPT tines, with 23” spacing. In stock models listed below. • Skidsteer Q-Tach $1,050 • Alo/Euro/Global Q-tach $1,050 • Optional Bolt on Guard - $320 (see last picture) For more info contact John 403-553-0000, or by email. Can arrange delivery.
$830 CAD / $609 USD
HLA DE5049 2 Prong Bale Spear HLA 2 prong bale spear, primarily used for round bales, but can also be used for large square bales. Can be fitted to any q-tach, or pin on loader. Comes with 2 49” BPT tines, with 30” spacing. In stock models listed below. • Skidsteer Q-Tach $830 • Alo/Euro/Global Q-tach $830 • John Deere 600/700 Q-Tach $1,030 • Optional Bolt on Guard - $320 (see last picture) For more info contact John 403-553-0000, or by email. Can arrange delivery.
$680 CAD / $499 USD
HLA DE3PH49 2 Prong 3PH Bale Spear HLA 2 prong 3ph bale spear, primarily used for round bales. Fits both CAT I & II 3ph’s, also fitted with a Reese receiver/ball hitch (ball hitch not included). Comes with 2 49” BPT tines. For more info contact John 403-553-0000, or by email. Can arrange delivery.
$1,720 CAD / $1,261 USD
HLA FE55049 4 Prong Bale Spear HLA 4 prong bale spear, with adjustable guard, used for large square bales. Can be fitted to any q-tach, or pin on loader. Comes with 4 49” BPT tines, with 19” spacing. • Extended Height of 84” • Retracted Height of 50” • Frame Width of 66” In stock models listed below. • Skidsteer Q-Tach $1,720 • Alo/Euro/Global Q-tach $1,720 • JD640/740 Q-Tach $1,890 For more info contact John 403-553-0000, or by email. Can arrange delivery.
$85,000 CAD / $62,330 USD
2022 Kuhn Knight VT 268 Twin Screw Vertical Mixer Kuhn Knight VT 268 680cu ft twin screw vertical mixer. Mixer comes standard with the 2-speed split drive gearbox, with planetary gearboxes, and a torque disconnect. Front cross conveyor with 36" chain, and slat discharge extension with magnet tip off. This unit has 14 19” tungsten coated knives that are in good shape. Belt extension (10% more capacity so total of 750 cu ft). Digi Star scale head, extra remote, platform, and 425/65R22.5 recap truck tires. For more info contact Sales 403-553-0000, or by email. Can arrange delivery. Financing available.
$6,900 CAD / $5,060 USD
HLA BK60 60" bale knife, with ALO/Global quick attach, other hookups available. • Slices Bales up to 60" in Diameter • Grabs & Retains Plastic Wrap & Net Wrap • Top Clamp Eliminates "Tail" Dropping into Mixer • Cuts Down TMR Processing Time up to 30% • BK60 has Adjustable Bumpers to Accommodate Bales Down to 48" • Individual Bolt on Knives for Easy Replacement • Minimum of 20gpm For more info contact Sales 403-553-0000, or by email. Can arrange delivery.
$9,750 CAD / $7,150 USD
Kuhn GA4120TH single rotary drawbar rake. Working width of 13’ 5”. Hydraulic rotor lift, and drawbar levelling. For more info contact Sales 403-553-0000, or by email. Can arrange delivery.
$31,000 CAD / $22,732 USD
New Holland 313 13’ center pivot disc mower conditioner. Comes with steel finger conditioners, drawbar hitch with swivel gearbox, quick fit knives, and 1000 1-3/8 PTO. For more info contact Sales 403-553-0000, or by email. Can arrange delivery. Financing available.
$2,980 CAD / $2,185 USD
HLA BG4000 Round Bale Grapple HLA round bale grapple, with skidsteer, or ALO/Global quick attach, other hookups available. • Designed for Gentle Handling of Heavy Wrapped Silage Bales • Includes Standard 8" Stroke Implement Cylinder • Works with up to 5 ft Diameter Bales • 2,500 lb. Capacity • Hose Kit w/Flat Faced Skidsteer Fittings Included Also available in a larger size to accommodate square bales, call for pricing. For more info contact John 403- 553-0000, or by email. Can arrange delivery.
