View Listing

New 2014 Farm King Y450R Mower 3 Blade Mower - Finishing

$1,750.00 CAD / $1,295.91 USD


Recently Added

  • Stock #: FKA12000006
  • Location: Nisku, Alberta

Farm King  Y450 48" Finishing Mower 

2014 Farm King Y450 48" Finishing Mowe*Old Yellowhead store stock. Special clearance price. Was $2,795; sale price $1,750 *Save $1045 !!

  • Cutting Width - 48"
  • Cutting Height - 1 1/2" to 4 1/2"
  • Blade Tip Speed - 15,485 ft/min
  • Blades - 3
  • Blade Material - 1/4" x 2 1/4" Hard surfacing
  • Blade Length - 17 3/4"
  • Blade Overlap - 1 5/8"
  • Deck Material - 10 gauge
  • Gearbox - Closed (540 RPM)
  • Gearbox Ratio - 1 : 1.93
  • Required Horsepower - 12 - 25 HP
  • 3-Point Hitch - Category 1
  • Spindles - Cast iron, sealed
  • Front Roller - 4" x 5 3/8"
  • Weight - 442 lbs

Farm King has been building top quality finishing mowers for 15 years and has refined these mowers to be among the best in the industry. Manufactured with top quality material, the edge of the mower deck features solid reinforcing rods.


Deliveries are available, ask your salesperson for details.

Prices are subject to applicable taxes.

Flaman Sales , Nisku, Alberta

View Listing
View Listing

New 2009 Allied 3072 Blade

$595.00 CAD / $440.61 USD


Recently Added

  • Stock #: FKA251002738
  • Location: Nisku, Alberta

Allied 6' Rear Blade 45 Series (brand new 3-point hitch linkage parts) * Special clearance price. Was $725; sale price $595 *Save $130 !!

  • Maximum HP - 30 HP
  • 3 - Point Hitch - Category 1
  • Moldboard thickness - 1/4"
  • Moldboard width - 72"
  • Moldboard Height - 12.5"
  • Adjustment -Manual 5 positions
  • Adjustment Angle - 30 degrees left or right
  • Adjustment tilt - 3-point hitch linkage
  • Cutting edge - 1/4" x 3" reversible
  • Weight - 180 lbs

Deliveries are available, ask your salesperson for details.

Prices are subject to applicable taxes.

Flaman Sales , Nisku, Alberta

View Listing
View Listing

Used Vertec Grain Dryer

$37,000.00 CAD / $27,399.29 USD


Recently Added

  • Stock #: 56HA063
  • Location: Nisku, Alberta

Vertec 6600-H 16ft 6 Tier Grain Dryer

Single Phase Input with inverter to 3 phase,  Propane
has auto fill and variable rate meter rolls.
Has a New Variable Rate Motor ($3,500 value) installed.
Has Full Roof with Sliding doors and small catwalk.
Comes with 2 Axles. Buyer responsible for transport.

*Price includes three aged augers:
2 @  Westfield 7"x 36 ft  one with a 3 hp motor and other with a 5 hp motor
[email protected] Sakundiak 7" x 14Meter (46 ft approx)  EMD with No motor and homemade Swivel Arc Kit.

Prices are subject to applicable taxes.

Flaman Sales , Nisku, Alberta

View Listing
View Listing

New 2018 Allied 6010 Snow Blower

$2,150.00 CAD / $1,592.12 USD


Recently Added

  • Stock #: FKAYC601019000028
  • Location: Lethbridge, Alberta

Allied 60" Snowblower with Hydraulic Chute Rotator

  • 60" Cutting Width
  • 24" Cutting Height
  • 4-Blade Fan
  • 22" Fan Diameter
  • 15" Auger Diameter
  • Hydraulic Chute Rotator
  • 20-40 HP 
  • 470 LBS



Deliveries are available, ask your salesperson for details.

Prices are subject to applicable taxes.

Flaman Sales , Lethbridge, Alberta

View Listing
View Listing

Used GrainKing Grain Dryer

$52,000.00 CAD / $38,507.11 USD


Recently Added

  • Stock #: GKD400
  • Location: Nisku, Alberta

Grain King 12ft Dryer 7 Tier Unit

Single phase, Natural Gas. With Partial Roof. 

New pieces include:  2 HP motor for Unload Auger (2 years Old).  Has New Variable Drive Motor for Meter Rolls (Never Installed original still working).  Extra Drive Belts included.
Unit has Variable rate control on Meter Rolls and auto fill feature

NO AXLES, BUYER MUST transport on his own COST.

Included is a 2 year old WESTFIELD 8 x41 EMD Auger with 5 Hp single phase motor.

Prices are subject to applicable taxes.

Flaman Sales , Nisku, Alberta

View Listing
View Listing

New 2019 Wheatheart X100-63 Grain Auger

$17,900.00 CAD / $13,255.33 USD


Recently Added

  • Stock #: AUG15351
  • Location: Nisku, Alberta

Wheatheart 10" x 63' Swing Auger

The X Series Auger features a precision engineered, commercial strength frame and redesigned hopper, as well as unmatched serviceability and extreme durability. Wear edge technology is standard on all Wheatheart X Series Auger which means 10 gauge steel reinforces the flighting edges where most of the wear occurs.

  • 10" Diameter
  • 63' Long
  • 540 PTO
  • Hydraulic Winch
  • Hydraulic mover
  • Reverser Kit
  • 13' 4" Transport Height
  • Low Profile Hopper
  • Scissor Lift Frame
  • Down spout
  • Light Kit
Features:
  • 6 service access points, with quicker more efficient daily maintenance through increased accessibility  
  • Hopper Lift Arm can be quickly changed from left to right for unloading on both sides
  • Steel Trussing added on all 84', 94', & 114' lengths for increased strength and stability
  • Removable End Plate for easy access to flighting in upper tube
  • Scissor Lift Frame, maximize reach and reduce swaying
Financing and leasing available. Ask about any current rebates available.

Deliveries are available, ask your salesperson for details.

Prices are subj

Flaman Sales , Nisku, Alberta

View Listing