$64,500 CAD / $47,177 USD
MINT CONDITION
New Discs, Boots, No-Till
$8,600 CAD / $6,290 USD
plank/steel board deck, Horst 12T, used 11R22.5 truck tires. *Lights and extended rear hitch $550 extra.*
Contact dealer for price
Recently Added
ENGINE POWER, HP (KW) 40 (29.8) TRANSMISSION 3-RANGE HST OR 12X12 SSS NATURAL, COMFORTABLE OPERATION Whether you choose an open platform or the Boomer™ cab, your comfort is built into the design. UNMATCHED VISIBILITY The distinctive Boomer sloped hood gives an unobstructed view. BOOMER GUARD6 You get the peace of mind of New Holland’s FREE Boomer Guard6 Limited Warranty that includes 2 years of “bumper-to-bumper” coverage plus an extra 4 years of powertrain protection. CLEAN POWER Quiet, clean-running engines save fuel and reduce your carbon footprint.
Contact dealer for price
Recently Added
Increase operator safety, comfort and performance with the revolutionary Schulte Flex-Arm. The Schulte Flex-Arm allows the operator to travel on the road while the Schulte 10’ or 15’ rotary cutter cuts the ditch slope. The tractor does not have to ride on the ditch slope so rollovers are very low risk. As an added bonus, wear & tear on the tractor is greatly reduced. Operator comfort is greatly increased. Operators who have had a chance to use the Schulte FLEX-ARM say comfort & safety are the best features. Visibility is improved. The operator is placed in a better position to view obstacles before they reach the rotary cutter. The FLEX-ARM and Schulte cutter can be used in wet conditions, which could make cutting more difficult if the tractor had to ride on the slope. Because of the unique way in which the FLEX-ARM is attached to the rotary cutter, it can be easily backed up to cut around approaches and other obstacles. Specs New heavy duty 11L x 15, 12 ply tires with a load capacity of 4000 lbs. Cut directly in-line with the tractor or at any offset distance up to 122” (10.16ft) Large 2-1/2” castor pivot shaft 6000 lb capacity 6 bolt hubs Spring steel tension bushings and induction hardened pins at major pivot points Minimum of 3 hydraulic circuits required to operate the FLEX ARM with a 15’ or 10’ mower
Contact dealer for price
Recently Added
Highline makes picking bales a breeze! Highline’s line-up of bale movers makes round bale handling a breeze. With the Bale Mover 1400, you get fast and efficient handling with non-stop picking and transporting. Unloading can be done without leaving the cab and with Highline’s ingenuity built into every bale mover, you can expect faster bale hauling with only one tractor and operator. The Model 1400 turns big moving jobs into a pleasure by hauling 14 bales in a double row of seven bales. It will load from either side and has the power to pick up bales on the fly.
Contact dealer for price
Recently Added
MAX BOOSTED ENGINE HP 165 RATED ENGINE HP 135 POWERFUL PRODUCTIVITY Five models ranging from 95 to 126 PTO horsepower are ready to boost your productivity in a wide array of applications including loader work, haymaking, row cropping, and roadside mowing. TAILORED FOR YOU Equip a T6 to meet your needs. An endless list of options are available including seats, a 2WD or FWD front axle, and three efficient transmission choices. COMFORTABLE HORIZON™ CAB The Horizon™ cab offers exceptionally low noise levels, ergonomic controls, Comfort Ride™ cab suspension, and more for day-long comfort and productivity. CLEAN ENERGY LEADERS ECOBlue™ HI-eSCR 2 engine technology provides Stage V emissions compliance and greater fluid efficiency for 25% longer service intervals.
Contact dealer for price
Recently Added
OVERALL OPERATING HEIGHT WITH FOUNDRY/EXCAVATING BUCKET SHORT LIP IN (MM) 151.4 (3845) OVERALL OPERATING HEIGHT WITH LOW PROFILE/STANDARD LIP BUCKET IN (MM) 155.6 (3952) POWERFUL PERFORMANCE 300 Series Loaders deliver performance in all conditions. While meeting extremely strict emissions requirements, the New Holland Tier 4 Final engines also use less fuel and are easy to maintain which decreases operating costs. SPEED AND EFFICIENCY The 300 Series Skid Steer Loaders have dual-range transmission which provides travel speeds in excess of 11 mph. This helps operators save time on and between worksites which optimizes efficiency. SMOOTH OPERATION The hydraulic system on New Holland Skid Steers delivers fast-cycle times. In-line hydraulic pumps also produce less noise and provide extra-smooth operation. COMFORT AND VISIBILITY The Skid Steer Loader has one of the most spacious cabs in the industry and provides outstanding visibility. The cab contains a see-through area on the roof for a clear view and a huge glass door for visibility at all corners.
New 2024 New Holland Discbine® PLUS Center-Pivot Disc Mower-Conditioners Miscellaneous
Add as favouriteContact dealer for price
Recently Added
TRANSPORT WIDTH FT. IN. (M) 10’ 4” (3.2) CUTTING WIDTH FT. IN. (M) 10’ 1” (3.0) CLEANER AND CLOSER CUTTING Get the cleanest and closest cut yet with the MowMax™ II PLUS true modular cutterbar. Faster knife tip speed, a slimmer cutterbar profile, and reshaped rock guards improve cut quality while providing a 30% lower cutting height. TIME-SAVING INNOVATIONS The standard QuickMax™ knife-change system and ShockPRO™ hubs are designed to save you hassle when you’re making hay. For additional peace of mind, the cutterbar is backed by a 36-month warranty. PIVOT TO GREATER PRODUCTIVITY Whether you need a nimble mower to enter tight places or big capacity for wide-open spaces, four center-pivot models, with cut widths from 10- to 16-feet wide, are designed and built with pride in New Holland, Pennsylvania. FROM WIDE SWATHS TO NARROW WINDROWS Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls, or high-contact chevron rolls.Choose between the chevron intermeshing rubber or steel rolls, or the LeaningEdge™ flail tine conditioning system to fit your needs. Enhanced swath control surfaces behind the conditioning system result in neater-looking swaths with improved dry down.
Contact dealer for price
Recently Added
HEAPED, SINGLE BEATER (CU. FT (M³)) 278 (7.87) HEAPED, DOUBLE BEATER (CU. FT. (M³)) 342 (9.68) PROVEN STRENGTH New Holland box spreaders are known for being built to last. They have durable floors and sides made from special corrosion-resistant steel for strength load after load. 12-YEAR BONDED PROTECTION PLAN New Holland box spreaders come with a 12-year Bonded Protection Plan that guarantees the floor and sides for peace-of-mind and better resale value. CAPACITY FOR YOUR OPERATION Five models, with 215 to 444 cu. ft. (6.10 to 12.57 m³) of capacity, are available to match the needs of your operation. Optional slurry sides — a New Holland exclusive — increase capacity by approximately 25% and reduce splash over. EASY SPEED CONTROLS Set apron speed from your tractor seat with the standard rotary quadrant control. Adjust from neutral, slow unloading, fast unloading, and cleanout. An optional hydraulic drive on the 185 and 195 provides even more variation in spreading rates.
Contact dealer for price
Recently Added
No Mow Limitations! Don’t Be Limited By Transport Width. In Just 30 Seconds Our Road Friendly Transport Option, Transforms Both Our 13 And 16 Foot R1’s To A Narrow 9 Foot Wide Transport. This Allows For Quick, Safe Travel To, From, And Between Fields. The All New Forward Mounted Cutterbar Design Provides A Cleaner, Smoother Cut Than Ever Before, And It’s Backed By A 3 Year Cutterbar Warranty. No Matter What The Harvest Situation Or Conditioning Need, The R1 Lays Down Well-formed, Well-conditioned Windrows With The Industry's Widest Roll At 129” (328cm), And Four Interchangeable Conditioning Options. Don’t Limit Your Harvesting Possibilities, Find Out Why More Top Producers Trust Macdon For Their Harvest.
Contact dealer for price
Recently Added
DIAMETER (IN. (CM)) 36-72 (91.5-182) WIDTH (IN. (CM)) 61.5 (156) BALE WITH THE BEST To help lower your operating costs, the Roll-Belt design can build the industry’s densest bales. Additionally, all models are backed by an industry-leading 2-year/15,000-bale base warranty and a 3-year/22,500-bale pickup warranty. INNOVATION THAT PACKS PAYBACK Durable pickups, smooth feeders, and heavy-duty rolls partner with short, tough belts for fast core starts and uniform bales in any crop type. DESIGNED WITH YOU IN MIND Standard features like banked grease zerks, hydraulic pickup lift, a premium cut-out clutch and wide-opening shields ensure that you stay productive. PRECISION TOOLS THAT IMPROVE PRODUCTIVITY Precision solutions, like IntelliBale™ baler automation, in-cab density control and factory-installed moisture sensing help you produce better bales.
Contact dealer for price
Recently Added
From 2 m to 16 m working width Tractors between 50 - 640 hp | 37 - 471 kW Working depth up to 12 cm Compact, versatile and easy to pull The Heliodor compact disc harrow can be used for shallow stubble cultivation on light and medium soils, and for seedbed preparation before mulch sowing, or after ploughing. This means the Heliodor can be used in both conventional and mulch sowing systems. High working speeds and a low power requirement give high-performance tillage. Work without clogging With its robust leaf spring elements, the Heliodor operates continuously and without blockage. Protected from dust & dirt The 510 mm diameter, concave discs are protected from dust, dirt and water penetration, in maintenance-free axial angular ball bearings with a special labyrinth sealing ring. The lightweight The Heliodor is lightweight so that implements, from 2,50 to 7 metres working width, can be handled on the tractor three-point linkage. Coupled for sowing The 3 and 4 metre mounted and the 4 to 6 metre semi-mounted versions, of the Heliodor, can be combined with the LEMKEN Solitair pneumatic seed drill LEMKEN Solitair if required. Gigant system for larger working widths For the large farm, the Gigant system carrier allows working widths of 8 to 16 metres to guarantee fast s
Contact dealer for price
Recently Added
ESSENTIAL PRODUCTIVITY The 500S zero turn mower is packed with essential features to deliver reliable productivity and performance. The differentiating 4 point suspension saves your body from the pains of continuous mowing. Plus, commercial-like performance and extras like the LED headlight make for a confident mowing experience season after season.
Contact dealer for price
Recently Added
AFFORDABLE COMMERCIAL ZERO TURN WITH NEXT GENERATION FERRIS SUSPENSION TECHNOLOGY Featuring the next generation of Ferris® suspension technology - ForeFront™ Suspension, a two-belt iCD™ cutting system, heavy-duty Hydro-Gear® ZT-3400® drive system and travel speeds up to 10 mph, the ISX™ 800 is engineered to increase efficiency and operator comfort.
