$119,900 CAD / $87,518 USD
16/31 row, 30/15" spacing, CCS, hydraulic drive, Pro-Shaft Drive with Pro-Series XP Row Units
$33,900 CAD / $24,745 USD
JUST IN
Nice LOW HOUR Case Skip loader PRE-EMISSIONS, With all rear Hydraulic 3 PTH functions and counter weight. Unit has front Auxiliary out lets Cab heat, Has Air but its non functional. Machine is tight and has Fresh paint. These Units make Very Good Heavy duty Loader tractors at 1/2 the price of a 85HP loader tractor! Financing available Trades welcome Delivery Available Message Jon Working DIrt Machinery
$343,300 CAD / $249,745 USD
Recently Added
Transmission: IVTCabFront Axle: MFWD w/ Suspension
$8,000 CAD / $5,820 USD
Recently Added
CONSIGNMENT2023 Kubota RA1035 Single Rotor Rake. Used for less then 100 acres, this rake is in very nice condition. Unit has a working width of 11’5” (3.50m) and comes in with a weight of only 926lbs (420kg). This unit is equipped with a pivoting 3pt headstock which ensures perfect ground following performance, and perfect tracking when cornering. This unit is a consignment cash sale item!
$23,800 CAD / $17,314 USD
Recently Added
Shiftronic transmission, Low profile hopper, 20mr or 706ft3, tandem axle, twin auger, magnet on chute, front ladder.
$24,000 CAD / $17,460 USD
Recently Added
20m3 or 706ft3, 1000 PTO, manual 2-speed gearbox, pivoting front conveyor, manual restrictors, low profile tub.
$2,040 CAD / $1,484 USD
Recently Added
• Cat 1, 3 point hitch • 3 PT mount • Reinforced moldboard • 5 reversible positions • For tractors up to 60HP • Adjustable tilt blades Specifications HP Rating:25 - 50 HP Mount:3 point No. of Shanks:5 Weight:605 lbs Width:72"
$2,040 CAD / $1,484 USD
Recently Added
• Cat 1, 3 point hitch • 3 PT mount • Reinforced moldboard • 5 reversible positions • For tractors up to 60HP • Adjustable tilt blades Specifications HP Rating:25 - 50 HP Mount:3 point No. of Shanks:5 Weight:605 lbs Width:72"
$980 CAD / $713 USD
Recently Added
ENGINE POWEREASE 7 HP / 212 CC STARTER TYPE RECOIL FUEL CAPACITY (QTS/L) 3.8 QUARTS / 3.6 LITER ENGINE CYCLE 4 STROKE # OF BLADES 24 BLADE POSITION REAR BLADE RPM 125 WORKING WIDTH 36” TOTAL WIDTH 36” TILLING DEPTH 7” TIRE SIZE 15-3/4” WEIGHT 136 LBS TRANSMISSION CHAIN & BELT DRIVE SPEEDS 2 FWD / 1 REV
$980 CAD / $713 USD
Recently Added
ENGINE POWEREASE 7 HP / 212 CC STARTER TYPE RECOIL FUEL CAPACITY (QTS/L) 3.8 QUARTS / 3.6 LITER ENGINE CYCLE 4 STROKE # OF BLADES 24 BLADE POSITION REAR BLADE RPM 125 WORKING WIDTH 36” TOTAL WIDTH 36” TILLING DEPTH 7” TIRE SIZE 15-3/4” WEIGHT 136 LBS TRANSMISSION CHAIN & BELT DRIVE SPEEDS 2 FWD / 1 REV
$870 CAD / $633 USD
Recently Added
WEIGHT:255 LBS WIDTH 84" HP RATING 20 - 30 HP MOLDBOARD CUTTING EDGE 6" MOLDBOARD HEIGHT 14-1/2" MOLDBOARD THICKNESS 3/16"
$870 CAD / $633 USD
Recently Added
WEIGHT:255 LBS WIDTH 84" HP RATING 20 - 30 HP MOLDBOARD CUTTING EDGE 6" MOLDBOARD HEIGHT 14-1/2" MOLDBOARD THICKNESS 3/16"
$2,650 CAD / $1,928 USD
Recently Added
• Cat 1, 3PT hitch • 270 degree rotation discharge chute • Multi-positional discharge angle • Special hardened blades: 1 fixed, 4 rotating • Easy flywheel service access • Large size input opening • 540 RPM PTO • Shear pin PTO yoke Specifications Chipper Capacity:5" Chipper Housing Opening:5" x 10" Dimension:43" L x 55" W x 66" H Discharge Hood Height:60" Discharge Hood Rotation:270° HP Rating:18- 45 HP PTO RPM:540 - 1000 R/MIN Rotor Knives:4 Rotor Size:24 - 3/4" Rotor Weight:125 lbs Weight:485 lbs
$2,650 CAD / $1,928 USD
Recently Added
• Cat 1, 3PT hitch • 270 degree rotation discharge chute • Multi-positional discharge angle • Special hardened blades: 1 fixed, 4 rotating • Easy flywheel service access • Large size input opening • 540 RPM PTO • Shear pin PTO yoke Specifications Chipper Capacity:5" Chipper Housing Opening:5" x 10" Dimension:43" L x 55" W x 66" H Discharge Hood Height:60" Discharge Hood Rotation:270° HP Rating:18- 45 HP PTO RPM:540 - 1000 R/MIN Rotor Knives:4 Rotor Size:24 - 3/4" Rotor Weight:125 lbs Weight:485 lbs