View Listing

Used 2015 MacDon FD75-40 DKD Header

$81,000.00 CAD / $60,660.53 USD


  • Stock #: UH4074
  • Location: Davidson, Saskatchewan

*40' to 45' Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive Draper Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088~To ensure customer satisfaction, Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size, rear ballast, unloading auger capability, and feeder lift cylinder capacity, etc.

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2016 MacDon FD75-40 DKD Header

$84,000.00 CAD / $62,907.21 USD


  • Stock #: UH4062
  • Location: Davidson, Saskatchewan

*40' to 45' Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~For 30', 35', 40', 45'. NOTE: for slow speed towing behind a Combine or Pick-up ONLY - do not exceed 25 MPH (40 km/h). Transport MUST not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2016 MacDon FD75-40 Header

$80,000.00 CAD / $59,911.63 USD


  • Stock #: UH4053
  • Location: Weyburn, Saskatchewan

*40 ft Flex Header SKD; *Transport; *UCA; *CNH Flag ship window

Young's Equipment Inc. , Weyburn, Saskatchewan

View Listing
View Listing

Used 2014 MacDon FD75-40 Header

$69,500.00 CAD / $52,048.23 USD


  • Stock #: UH4033
  • Location: Assiniboia, Saskatchewan

*40 Ft. 12.2 m Double Knife Drive Draper Header Flex frame Pointed Profile Double Heat Treated forged steel guards Coarse Serration sections - 9 teeth per inch Pick-up design reel type - flip over action split reel span - 2 reels connected mid-header - 3 reel lift arms 5 bats Poly Material - single finger - 6 inch spacing - Heavy Duty material Hydraulic Reel Fore-Aft adjustment cylinders Cutterbar Poly factory installed. USUP Hrs 3.5.; *CA25 Adapter Installed and Fully Assembled for CIH 7 8010 7 8120 5 6 7088 5 6 7 8 9130 To ensure customer satisfaction Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size rear ballast unloading auger capability and feeder lift cylinder capacity etc. s/n:260899-14; *Stabilizer Wheels Slow Speed Transport USUP Hrs 5.5. Transport must not exceed 25 mph 40 kph when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65 FD75 only. Must order C1983 for 2012 and older D50 D60 FD70. s/n:256861-14; *40 to 45 Upper Cross Auger USUP Hrs 3.5.; *Outboard Skid Shoes with Poly USUP Hrs 0.85.; *Inboard Skid Shoes with Poly - Qty 2 Sets USUP Hrs 0.85. Can order two sets for 30 and larger headers. 55 lbs each set 613.00 each set. -- 40 feet

Young's Equipment Inc. , Assiniboia, Saskatchewan

View Listing
View Listing

Used 2010 MacDon FD70-40 SKD Header

$45,000.00 CAD / $33,700.29 USD


  • Stock #: UH3940
  • Location: Regina, Saskatchewan

*40', Flex, SK Knife Dr, ptd - DHT Guards, C Sec; *CA20 Adapter Installed for CIH, NH, JD: Incomplete; *CaseIH flag ship 10,20,30 series; *Stabilizer Whls / Slow Speed Transport Pkg; *30' - 45' UCA

Young's Equipment Inc. , Regina, Saskatchewan

View Listing
View Listing

Used 2015 MacDon FD75-45 Header

$78,000.00 CAD / $58,413.84 USD


  • Stock #: UH3909
  • Location: Davidson, Saskatchewan

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2014 MacDon FD75-40 DKD Header

$73,500.00 CAD / $55,043.81 USD


  • Stock #: UH3486
  • Location: Davidson, Saskatchewan

FD75 FLEXDRAPER® HEADER FOR COMBINE *40 Ft. (12.2 m) Double Knife Drive Draper Header Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), Cutterbar Poly factory installed. USUP (Hrs): 3.5.; FACTORY INSTALLED CA25 ADAPTER > Required Components - CA25 Adapter *CA25 Adapter Installed and Fully Assembled for CIH 7/8010, 7/8120, 5/6/7088, 5/6/7/8/9130 To ensure customer satisfaction, Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size, rear ballast, unloading auger capability, and feeder lift cylinder capacity, etc.; PERFORMANCE OPTIONS - DEALER INSTALLED ATTACHMENTS > Skid Shoes *Outboard Skid Shoes with Poly USUP (Hrs): 0.85.; PERFORMANCE OPTIONS - DEALER INSTALLED ATTACHMENTS > Skid Shoes *Inboard Skid Shoes with Poly - Qty 1 Set USUP (Hrs): 0.85. Can order two sets for 30' and larger headers.; PERFORMANCE OPTIONS - DEALER INSTALLED ATTACHMENTS > Stabilizer Wheels / Slow Speed Transport Packages *Stabilizer Wheels / Slow Speed Transport USUP (Hrs): 5.5. Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2018 MacDon FD75-40 DKD Header

$104,000.00 CAD / $77,885.12 USD


  • Stock #: UH4083
  • Location: Regina, Saskatchewan

*Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators, knife reverser, seed saver, inboard and outboard adjustable skid shoes; *CA25 Adapter installed and fully assembled for CIH 10/20/30/40 Series, 5/6/7088 ? Note 1 - See Section 3; *Driveline for 2017 and newer combines - 21 Tooth Spline Driveline; *Stabilizer Wheels / Slow Speed Transport Package (30', 35', 40', 45') NOTE: for slow speed towing behind a combine or pick-up ONLY - Do not exceed 20 MPH (32 km/h) Stabilizer Wheels / Slow Speed Transport ?; *Upper Cross Auger

Young's Equipment Inc. , Regina, Saskatchewan

View Listing
View Listing

Used 2017 MacDon FD75-40 DKD Header

$92,000.00 CAD / $68,898.37 USD


  • Stock #: UH4070
  • Location: Davidson, Saskatchewan

Double Knife; Slow Speed Transport; Stabilizer Wheels; Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Heavy Duty Poly Material reel finger - single finger - 6 inch spacing, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088; *40' to 45' Upper Cross Auger; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CNH 6T Driveline - CA25. Part for Case Combine years 2016 and older. If you are putting this on a 2017 or newer combine you will need part B6364

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2017 MacDon FD75-40 DKD Header

$96,000.00 CAD / $71,893.96 USD


  • Stock #: UH3869
  • Location: Watrous, Saskatchewan

FD75 FLEXDRAPER® HEADER FOR COMBINE *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header; FACTORY INSTALLED CA25 ADAPTER > Required Components *CA25 Adapter Installed and Fully Assembled for JD 60/70, S Series Combine must be equipped with Auto Header Height control option for optimum performance with the FD75. John Deere CTS/STS California Rice Only - Flighting Extension Kit B4829 and Stripper Bar Kit B4921 are required for CA25. John Deere 70 Series and prior combines must to be equipped with optional heavy duty lift cylinders for headers larger than 30', check with John Deere for; CA25 STAND-ALONE COMBINE ADAPTER > Required Under Certain Circumstances *John Deere Hydraulic Completion Kit Required on 2016 and prior FD75 when used on 2016 and newer John Deere S-Series combines. Kit is included on 2017 and newer FD75.; PERFORMANCE OPTIONS > Rock Retarder Kits *40' & 45' Rock Retarder Kit; PERFORMANCE OPTIONS > Spare Knife *40' DK - Coarse Serration; PERFORMANCE OPTIONS > Stabilizer Wheels *Stabilizer Wheels / Slow Speed Transport For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; PERFORMANCE OPTIONS > Upper Cross Auger *40' to 45' Upper Cross Auger; *5 Bat Tine Reinforcement Kit For Extreme Heavy Reel Loads

Young's Equipment Inc. , Watrous, Saskatchewan

View Listing
View Listing

Used 2016 MacDon FD75-45 DKD Header

$87,000.00 CAD / $65,153.90 USD


  • Stock #: UH3790
  • Location: Moose Jaw, Saskatchewan

*40' to 45' Upper Cross Auger; *45 Ft. (13.7 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~For 30', 35', 40', 45'. NOTE: for slow speed towing behind a Combine or Pick-up ONLY - do not exceed 25 MPH (40 km/h). Transport MUST not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088

Young's Equipment Inc. , Moose Jaw, Saskatchewan

View Listing
View Listing

Used 2014 MacDon FD75-40 DKD Header

$76,500.00 CAD / $57,290.50 USD


  • Stock #: UH3608
  • Location: Chamberlain, Saskatchewan

*40 Ft. (12.2 m) Double Knife Drive Draper Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), Cutterbar Poly factory installed. USUP (Hrs): 3.5.; *CA25 Adapter Installed and Fully Assembled for CIH 7/8010, 7/8120, 5/6/7088, 5/6/7/8/9130~To ensure customer satisfaction, Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size, rear ballast, unloading auger capability, and feeder lift cylinder capacity, etc.; *Stabilizer Wheels / Slow Speed Transport~USUP (Hrs): 5.5. Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *40' to 45' Upper Cross Auger~USUP (Hrs): 3.5.; *Outboard Skid Shoes with Poly~USUP (Hrs): 0.85.; *Inboard Skid Shoes with Poly - Qty 2 Sets~USUP (Hrs): 0.85. Can order two sets for 30' and larger headers. 55 lbs/each set; $613.00/each set.

Young's Equipment Inc. , Chamberlain, Saskatchewan

View Listing