$10,779 CAD / $7,845 USD
NEW! WC1105 WOOD CHIPPER, 3-PT HITCH, PTO DRIVEN - 540 RPM, 2 POSITION CHUTE, 2 KNIVES, SU #303002
$5,743 CAD / $4,180 USD
Rotary Cutter - Base: 2721XF - Cutting Width: 72 Inches (1,830 mm) - Cutting Height: 1.5 to 9 Inches (38 to 229 mm) - Cutting Capacity (Diameter): 0 to 1 Inch (0 to 25 mm) - Cutting Chamber Depth: 7.5 Inches (190 mm) - Tractor PTO Horsepower Range: 25 to 65 Horsepower - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Driveline with Slip Clutch - Hitch: Lift Type Category I, Adaptable to II, iMatch, and AutoHitch Compatible - Overall Width: 75 Inches (1,905 mm) - Overall Length: 111.5 Inches (2,832.1 mm) - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge (3 mm) - Skirt Thickness: 11 Gauge (3 mm) - Gear Case Horsepower Rating: 65 Horsepower - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch (13 mm) - Blade Width: 3 Inches (76 mm) - Blade Tip Speed: 14,955 fpm (76 m/s) - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 28.5 Inches (723.9 mm) - Laminated Tire
$1,759 CAD / $1,280 USD
Box Blade - Base: 1041XF - 48 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 48 Inches - Tractor Horsepower Recommendations: 17 to 45 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 355 Pounds - Warranty: 1 Year
$1,772 CAD / $1,290 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
$1,621 CAD / $1,180 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
$1,800 CAD / $1,310 USD
Post Hole Digger - Base: 1225XF - Boom Outside Diameter: 2 7/8 Inches - Yoke Outside Diameter: 2 3/8 Inches - Auger Speed: 180 RPM - Gearbox Gear Ratio: 3:1 - Gearbox Maximum Horsepower Rating: 25 - PTO Horsepower Ranges: 18 through 25 - 3 Point Hitch Category: Category I - Works with Auger Model Numbers: PHA006, PHA009, PHA012 - Weight: 112 Pounds - 6 Inch X 36 Inch Auger
$921 CAD / $670 USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year
$1,292 CAD / $940 USD
Box Blade - Base: 1741XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 48 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 360 Pounds - Warranty: 1 Year -- New48" Working Width
$7,282 CAD / $5,300 USD
Available April 2024 -- SB1174 HYDRAULIC ROTATE VERY LITTLE USE
$1,759 CAD / $1,280 USD
Box Blade - Base: 1041XF - 48 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 48 Inches - Tractor Horsepower Recommendations: 17 to 45 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 355 Pounds - Warranty: 1 Year -- Four Foot Working Width
$632 CAD / $460 USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year -- New