$2,968 CAD / $2,160 USD
Land Plane - Base: 3911XF - 60 Inches Working Width - 65 Inches Overall Width - 35 Inches Overall Height - 48 Inches Overall Length - 16 Inches Height to Hitch Pins - 484 Pounds Operating - Tractor Engine Horsepower Requirements: 25 to 50 Horsepower - 1/4 Inch Side Panel Thickness with Formed Edges - 3/8 Inch Adjustable Skid Shoe Thickness - 0 Inch to Negative 2.5 Inches Adjustable Blade Depth via Skid Shoes - Standard Duty - Four Heat Treated 4 Position Shank Scarifiers - Scarifier Depth Ranges: 2 Inches, 0 Inch, Negative 2 Inches, Negative 4 Inches - 3/8 Inch X 6 Inches High, Carbon, Heat Treated, Reversible and Replaceable, Cutting Edge Blades Two Cutting Edges - Category 1, Three Point Hitch - iMatch / Quick Hitch Compatible
$2,006 CAD / $1,460 USD
Box Blade - Base: 1041XF - 48 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 48 Inches - Tractor Horsepower Recommendations: 17 to 45 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 355 Pounds - Warranty: 1 Year
$2,034 CAD / $1,480 USD
Box Blade - Base: 1041XF - 48 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 48 Inches - Tractor Horsepower Recommendations: 17 to 45 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 355 Pounds - Warranty: 1 Year
$2,858 CAD / $2,080 USD
Front Blade - Base: 2401XF - 60 Inch Cutting Width - 21 Inch Moldboard Height - 12 Gauge Moldboard Thickness - 26.5 Inch Overall Depth - 1/4 Inch x 6 Inch Reversible Cutting Edge - 5 Angle Adjustments up to 30 Degrees - Fits John Deere H120 and 220R Loaders - Compatible with John Deere 1000 Series and 2000 Series Tractors - 25 Maximum Tractor Horsepower Recommendation
$5,743 CAD / $4,180 USD
Rotary Cutter - Base: 2721XF - Cutting Width: 72 Inches (1,830 mm) - Cutting Height: 1.5 to 9 Inches (38 to 229 mm) - Cutting Capacity (Diameter): 0 to 1 Inch (0 to 25 mm) - Cutting Chamber Depth: 7.5 Inches (190 mm) - Tractor PTO Horsepower Range: 25 to 65 Horsepower - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Driveline with Slip Clutch - Hitch: Lift Type Category I, Adaptable to II, iMatch, and AutoHitch Compatible - Overall Width: 75 Inches (1,905 mm) - Overall Length: 111.5 Inches (2,832.1 mm) - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge (3 mm) - Skirt Thickness: 11 Gauge (3 mm) - Gear Case Horsepower Rating: 65 Horsepower - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch (13 mm) - Blade Width: 3 Inches (76 mm) - Blade Tip Speed: 14,955 fpm (76 m/s) - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 28.5 Inches (723.9 mm) - Laminated Tire
$4,836 CAD / $3,520 USD
Rotary Cutter - Base: 2721XF - Cutting Width: 72 Inches (1,830 mm) - Cutting Height: 1.5 to 9 Inches (38 to 229 mm) - Cutting Capacity (Diameter): 0 to 1 Inch (0 to 25 mm) - Cutting Chamber Depth: 7.5 Inches (190 mm) - Tractor PTO Horsepower Range: 25 to 65 Horsepower - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Driveline with Slip Clutch - Hitch: Lift Type Category I, Adaptable to II, iMatch, and AutoHitch Compatible - Overall Width: 75 Inches (1,905 mm) - Overall Length: 111.5 Inches (2,832.1 mm) - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge (3 mm) - Skirt Thickness: 11 Gauge (3 mm) - Gear Case Horsepower Rating: 65 Horsepower - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch (13 mm) - Blade Width: 3 Inches (76 mm) - Blade Tip Speed: 14,955 fpm (76 m/s) - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 28.5 Inches (723.9 mm) - Laminated Tire
$4,218 CAD / $3,070 USD
Rotary Cutter - Base: 2711XF - Cutting Width: 60 Inches (1524 mm) - Cutting Height: 1.5 to 9 Inches (38 to 229 mm) - Cutting Capacity (Diameter): 0 to 1 Inch (0 to 25 mm) - Cutting Chamber Depth: 7.5 Inches (190 mm) - Tractor PTO Horsepower Range: 19 to 65 Horsepower - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Driveline with Slip Clutch - Hitch: Lift Type Category I, Adaptable to II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches (1,600.2 mm) - Overall Length: 101.2 Inches (2,570.5 mm) - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge (3 mm) - Skirt Thickness: 11 Gauge (3 mm) - Gear Case Horsepower Rating: 65 Horsepower - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch (13 mm) - Blade Width: 3 Inches (76 mm) - Blade Tip Speed: 14,355 fpm (72.8 m/s) - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches (567 mm) - Laminated Tire
$1,951 CAD / $1,420 USD
Box Blade - Base: 1041XF - 48 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 48 Inches - Tractor Horsepower Recommendations: 17 to 45 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 355 Pounds - Warranty: 1 Year
$6,760 CAD / $4,920 USD
Pull Type Snow Blower - Base: 3851XF - PTO Horsepower Power Requirements: 20 to 65 Horsepower - Tractor PTO RPM: 540 RPM - Shipping Weight: 660 Pounds - Operating Weight: 630 Pounds - Working Width: 73 3/4 Inches - Working Height: 25 1/2 Inches - Overall Width: 75 Inches - Overall height (without chute): 36 1/2 Inches - Overall height (with chute closed): 60 1/2 Inches - Overall Length: 40 1/4 Inches - Position Marker: Yes - Chain Idler: Yes, Manual Adjustment - Parking Stand: Yes - Number of Auger Shear Bolts: 1 - Number of Impeller Shear Bolts: 1 - Type of Hitch: 3 point Category I - Quick Hitch Compatibility: Yes, iMatch Compatible - Direction of Impeller Rotation: Counterclockwise - Impeller Diameter: 24 Inches - Impeller Width: 7 Inches - Number of Impeller Blades: 4 - Impeller Shaft Diameter: 1 3/8 Inches - Impeller RPM: 540 RPM - Impeller Blade Thickness: 3/16 Inches - Single Auger - Auger Diameter: 15 Inches - Auger Drive System: Chain No. 60 - Auger Flighting Thickness: 1 1/4 Inches - Auger RPM: 170 RPM - Housing Thickness: 14 Gauge - Side Panel Thickness: 14 Gauge - Impeller Housing Thickness: 12 Gauge - Two Part Chute - Position: Right - Rotation of chute: Manual - Rotation Angle: 245 Degrees - Hydraulic Flow Restrictor Rotation: Yes - Deflector Adjustment: Manual - Cutting Edge: Welded - Cutting Edge Material: Carbon Steel - Cutting Edge Dimension: 3/8 Inches x 2 Inches - Skid Shoe: Steel Shoe - Skid Shoe Material: Carbo
$2,130 CAD / $1,550 USD
Land Plane - Base: 3901XF - Working Width: 54 Inches - Overall Width: 58 Inches - Overall Height: 33 Inches - Overall Length: 48 Inches - Height to Hitch Pins 14 Inches - Operating Weight: 316 Pounds - Tractor Horsepower Requirement: 18 to 30 Horsepower - Side Panel Thickness: 3/16 Inch with Formed Edges - Adjustable Skid Shoe Thickness: 1/4 Inch - Adjustable blade depth from 0 to 2.5 Inches via skid shoes - Light Duty - Scarifiers Shank: Heat Treated 3 Position - Number of Scarifiers: 4 - Depth Range: 0 Inch, 1.5 Inches, 3 Inches - Reversible and Replaceable, 3/8 Inch X 6 Inch High Carbon Heat Treated Cutting Edges - Number of Cutting Edges: 2 - Hitch: Clevis with Pin
$42,305 CAD / $30,790 USD
Hay Tedder - Base: 0341XF - 26 Foot, 4 Inch Working Width - 10/2 Turbo Tines are Designed for Clean and Efficient Tedding - Radial Pin Clutch - 540 RPM PTO Shaft - Fully Enclosed Oil Bath Gearboxes - Finger Joints at Wing Pivot Points - Standard Hydraulic Lift and Tilt - Transport Lights, SMV, and Safety Tow Chain - 1 Year Parts and Labor Warranty
$3,559 CAD / $2,590 USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
