$2,386 CAD / $1,750 USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield. -- NewType: 5 Ft, Mounted (Integral)
$3,245 CAD / $2,380 USD
Front Blade - Base: 2091XF - Loader Mounted Front Blade - Manual Angle Adjustment - Cutting Width: 6 Feet - Loader Series: John Deere 300, 400, and 500 - Dimensions: Width 72 Inches x Height 23 Inches x Depth 34 Inches - Operational Weight: 400 Pounds -- New
$1,214 CAD / $890 USD
Box Blade - Base: 1742XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 60 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 405 Pounds - Warranty: 1 Year -- 60" Working Width
$2,154 CAD / $1,580 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year -- 60" Working Width
$1,595 CAD / $1,170 USD
Bale Spear - Base: 2014XF - Primary Spears: Three at 49 Inches x 2 Inches (Approx. 44 Inches Usable Length) - Capacity: One Large Round Bale (2,500 Pounds) or One Large Square Bale (2,500 Pounds) - Dimensions: 20 Inches High x 46 Inches Wide x 54 Inches Long - Fits on Global Series Loaders - Operational weight: 173 Pounds -- New
$1,677 CAD / $1,230 USD
Broadcast Spreader - Base: 3072XF - Hopper Material: Polyethylene - Hopper Weight Capacity: 678 Pounds - Hopper Volume Capacity: 10.6 Cubic Feet + Machine Weight: 125 Pounds - Swath Spread: 46 Feet - Hopper Width: 42 Inches - Hopper Height: 40 Inches - Tractor PTO Horsepower Range: 16 to 55 - PTO RPM: 540 RPM - PTO Shaft Category I (Heavy Duty Shielded 1 3/8 Inches) 3 Point Hitch: Category 1 - iMatch Hitch Compatible (1000)
$2,864 CAD / $2,100 USD
Post Hole Digger – Base: 1228XF – Boom Outside Diameter: 3 1/2 Inch Reinforced - Yoke Outside Diameter: 2 7/8 Inch Reinforced - Auger Speed: 135 RPM - Gearbox Gear Ratio: 4:1 - Gearbox Horsepower Rating: 90 - PTO Horsepower Range: 40 to 90 - 3 Point Hitch Category: Category I or II - Works with Auger Model Numbers: PHA106, PHA109, PHA112, PHA118, PHA124, PHA132 - Weight: 260 Pounds - 12 Inch x 48 Inch Auger
$4,091 CAD / $3,000 USD
Hydraulic Grapple -- Hydraulic Grapple
$1,145 CAD / $840 USD
Box Blade - Base: 1742XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 60 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 405 Pounds - Warranty: 1 Year -- New60"
$832 CAD / $610 USD
Rear Blade - Base: 1751XF - 3 Point Hitch: Category I - Working Width: 48 Inches - Operational Weight: 186 Pounds - Tractor Horsepower: 18 PTO (Max) - Tilt Positions: None - Offset: None - Pivot: 360 Degrees - Parking Stand: Standard - Moldboard Height: 14.5 Inches - Moldboard Length: 48 Inches - Moldboard Thickness: 1/4 Inch - Duty: Economy Duty - Cutting Edge: 3/8 Inch x 6 Inches Reversible - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side -- New48" Working Width
$1,609 CAD / $1,180 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year -- New60" Working Width
$1,268 CAD / $930 USD
Post Hole Digger - Base: 1225XF - Boom Outside Diameter: 2 7/8 Inches - Yoke Outside Diameter: 2 3/8 Inches - Auger Speed: 180 RPM - Gearbox Gear Ratio: 3:1 - Gearbox Maximum Horsepower Rating: 25 - PTO Horsepower Ranges: 18 through 25 - 3 Point Hitch Category: Category I - Works with Auger Model Numbers: PHA006, PHA009, PHA012 - Weight: 112 Pounds -- New
