$4,205 CAD / $3,080 USD
Residential Lawn Mower - 18 Horsepower (Engine) - Twin Cylinder Engine - Carbureted - Gas Engine - Kawasaki - Gear Drive - Manual Lift - Two Wheel Drive (2WD) - 42 Inch Mower - Mulch Deck - Material Collection System (MCS) Bagger -- Transmission: GearDrive Type: 2WDWidth: 42 inEngine Type: Gas
$10,786 CAD / $7,900 USD
Commercial Zero Turn Mower - 24 Horsepower (Engine) - Twin Cylinder Engine - Air Cooled - Gas - Generac - Hydrostatic Drive - 54 Inch Mower - Side Discharge - Mulch Kit - Suspension Seat - Material Collection System (MCS) Bagger - Weight Bracket - Weights -- Width: 54 inEngine Type: Gas
$1,256 CAD / $920 USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
$1,256 CAD / $920 USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
$3,536 CAD / $2,590 USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
$4,096 CAD / $3,000 USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
$1,434 CAD / $1,050 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
$1,652 CAD / $1,210 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
$1,652 CAD / $1,210 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
$1,611 CAD / $1,180 USD
Box Blade - Base: 1741XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 48 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 360 Pounds - Warranty: 1 Year
$1,611 CAD / $1,180 USD
Box Blade - Base: 1741XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 48 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 360 Pounds - Warranty: 1 Year
$915 CAD / $670 USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year
