$2,386 CAD / $1,750 USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield. -- NewType: 5 Ft, Mounted (Integral)
$2,836 CAD / $2,080 USD
Front Blade - Base: 2401XF - 60 Inch Cutting Width - 21 Inch Moldboard Height - 12 Gauge Moldboard Thickness - 26.5 Inch Overall Depth - 1/4 Inch x 6 Inch Reversible Cutting Edge - 5 Angle Adjustments up to 30 Degrees - Fits John Deere H120 and 220R Loaders - Compatible with John Deere 1000 Series and 2000 Series Tractors - 25 Maximum Tractor Horsepower Recommendation
$1,623 CAD / $1,190 USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year
$1,623 CAD / $1,190 USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year
$3,600 CAD / $2,640 USD
Residential Lawn & Garden Mower - 22 Horsepower (Engine) - Twin Cylinder Engine - Air Cooled - Carbureted - Gas Engine - Briggs and Stratton - Hydrostatic Drive - Manual Lift - Manual Steering - Two Wheel Steering - Two Wheel Drive (2WD) - 42 Inch Mower - Side Discharge -- Transmission: HydroDrive Type: 2WDWidth: 42 inEngine Type: Gas
