$2,383 CAD / $1,750 USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield. -- NewType: 5 Ft, Mounted (Integral)
$2,832 CAD / $2,080 USD
Front Blade - Base: 2401XF - 60 Inch Cutting Width - 21 Inch Moldboard Height - 12 Gauge Moldboard Thickness - 26.5 Inch Overall Depth - 1/4 Inch x 6 Inch Reversible Cutting Edge - 5 Angle Adjustments up to 30 Degrees - Fits John Deere H120 and 220R Loaders - Compatible with John Deere 1000 Series and 2000 Series Tractors - 25 Maximum Tractor Horsepower Recommendation
$1,620 CAD / $1,190 USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year
$1,620 CAD / $1,190 USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year
$21,920 CAD / $16,100 USD
25 HP, LIQUID COOLED GAS, FRONT MOUNT MOWER, 2WS, 72" SIDE DISCHARGE, 60" FRONT ROTORY BROOM, HYDRO (FOOT TWIN TOUCH), TURF TIRES, ELECTRIC PTO, HYDRAULIC DECK LIFT, SHAFT DRIVEN DECK, POWER STEERING, STANDARD SEAT - VISIT OUR WEBSITE DEEREQUIPMENT.COM TO VIEW OUR INVENTORY ONLINE. SU# 345936 -- Two wheel drive Drive Type: 2WD23X10.5-12 4pr turf tires Width: 72 inAdjustable suspension seat Engine Type: Gas
$17,563 CAD / $12,900 USD
27 HP, AIR COOLED GAS, ZERO TURN MOWER, 2WS, 60" MULCH DECK, HYDRO (HAND LEVER), TURF TIRES, ELECTRIC PTO, HYDRAULIC DECK LIFT, BELT DRIVEN DECK, SEAT W/ ARMRESTS, BATTERY IS GOOD - VISIT OUR WEBSITE DEEREQUIPMENT.COM TO VIEW OUR INVENTORY ONLINE. SU# 347525 -- Drive Type: 2WDWidth: 60 inEngine Type: Gas
$3,594 CAD / $2,640 USD
Residential Lawn & Garden Mower - 22 Horsepower (Engine) - Twin Cylinder Engine - Air Cooled - Carbureted - Gas Engine - Briggs and Stratton - Hydrostatic Drive - Manual Lift - Manual Steering - Two Wheel Steering - Two Wheel Drive (2WD) - 42 Inch Mower - Side Discharge -- Transmission: HydroDrive Type: 2WDWidth: 42 inEngine Type: Gas
