Brindley Auction Service

Used Wallenstein WP830 Wood Processor ONE OWNER

$11,500 CDN

Stock number: BAS# E283
View on agdealer.com
774808 Hwy 10 South, Markdale, Ontario, N0C 1H0

Price CDN:
 $11,500 CDN
New/Used:
 Used
Manufacturer:
 Wallenstein
Model:
 WP830
Type:
 Wood Processor
Location:
 Markdale
Hours:
 34 hrs
Stock number:
 BAS# E283

Description:   LIKE NEW! The Wallenstein Wood Processors are designed to connect to and pull logs to the machine, position for cutting with a chain saw and split the resulting log. Wood Splitter, Winch, Chainsaw Holder, Trailer Mounted with Transport Lights, Gas Engine, 4 Way Splitter. ONE OWNER! JUST IN! STOCK# BAS E283 The Wallenstein Wood Processor consists of a winch mounted in a frame to pull or winch logs into the log chute and then position them at the sawing location. A lever on the left-hand side of the frame engages the winch motor to pull in the cable. The engaging lever is spring-loaded and will return to its OFF position when the lever is released. The lever on the top locks and unlocks the winch drum which allows the cable to be pulled out -freewheel. Use the left lever on the control panel to engage the hydraulic motor that drives the winch to pull or move the log. The operator uses his own chain saw to cut the log to the desired length. When the log is cut, the piece rolls into the splitting chamber where the cylinder pushes it through the splitting wedge. Guides and markers on the cutting and splitting chambers show the operator the status of those areas. 22 GPM 2 stage hydraulic pump. 24" stoke, with 7 second full stroke splitting cycle time. 25 Ton ram.

* Prices may be approximated using an exchange rate and do not constitute an offer to sell.
Consult with the Dealer at the time of purchase for the current rate and amount.
View Map View Map
This piece of equipment can be financed online through:

National Leasing Farm Credit Canada