$16,250.00 CAD
Recently Added
Schulte Snow Blower FM 350 Tractor Front Mount Kit
- Enjoy the convenience, comfort and improved performance of a front mounted snow blower. No matter how much snow you need to move you will appreciate the FM-350.
- The FM-350 gives you the ability to mount your 3pt snow blower on the front of your tractor instead of on the tractor's rear 3pt hitch.
- Better visibility and ergonomics when coupled with a Schulte Snow Blower.
- Blowing snow while driving forward, is more efficient than blowing snow in reverse.
- The FM-350 allows you an increased selection of travel speeds, as your tractor has many more forward gears then reverse gears. This increased gearing selection will result in better snow blowing performance and less wear and tear on the tractor clutch, and your neck.
- The FM-350 is available without a drive train to be used with the Schulte SV series of Folding V Plows.
- Accommodates tractors between 151” and 211” measured from front mount plate to drawbar pin
- Weight: 1650 lbs
- Tractor HP: 250HP max
Deliveries are available, ask your salesperson for details.
Prices are subject to applicable taxes.
Flaman Sales , Nisku, Alberta
$31,900.00 CAD / $25,460.93 USD
Schulte 15' GX-150 Rotary Mower
- General duty 15 foot flex wing rotary mower
- A single domed 10 gauge continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
- An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
- Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
- A four-gearbox drive line with independent slip clutches
- Deck protection rings are standard and protect the cutter deck from rising blades
- Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors
- High flex wing working range of 25° down to 90° up
- Solid laminated tires 20” or 26” or forklift tires available
- 4, 6 or 8 tire options
- Heavy duty 3/4” thick blade disc with 4” blades and pentagon blade bolts
- Safety light kit
- Pro Level hitch
- Levelling rod (Includes addition of second tension link)
- 540 or 1000 RPM Drive package
- Single chains front and rear
Flaman Sales , Medicine Hat, Alberta
Contact dealer for price
Trail hitch, solid tongue, CV shaft 1 3/8 x 21 spline, fixed knife, walking axle kit, tire assy. ST 205/90-15
Minto Ag Ltd. , RR#3 Harriston, Ontario
Contact dealer for price
Used Schulte Soilstar DHX-600 60' Disc
- 60' Tilage Width/Length
- Hydraulics
Deliveries are available, ask your salesperson for details.
Prices are subject to applicable taxes.
Flaman Sales , Moosomin, Saskatchewan
$27,500.00 CAD / $21,949.08 USD
2013 Schulte XH1500 series 3 Rotary Cutter
- 15' batwing
- 1000 pto
- Heavy 5" blades
- Foam filled aircraft tires
- Very good condition
- Well maintained
Call or text 204-825-0170
Prices are subject to applicable taxes.
Flaman Sales , Nisku, Alberta
$43,900.00 CAD / $35,038.71 USD
Schulte RS320 Conveyor Jumbo Rock Picker
- Extra large 3.2 cubic yard (2.43 m3) hopper
- Hydraulic drive
- Continuous conveyor style pickup
- Fully grated hopper bottom
- Wht: 5522 lbs. (2450 kg)
- 75 HP min
- Surface rock from 2 to 28 inch diameter
- 50% less trash then reel type
The Schulte RS320 Rock Picker features an extra large 3.2 cubic yard (2.43 m3) hopper for increased rock removal efficiency. The RS320's hopper has twice the capacity of an average rock picker hopper. This ensures that more time is spent picking rocks and less time traveling to the dump point.
The RS320's new T-iron tapered grate with 3/4” bottom and 1/2” top material virtually eliminates all small rock jamming. And the 48" grate which is 17" longer than most reel type rock pickers on the market picks 50% less dirt and trash than reel types because it allows more time to sift the soil out before the rock enters the bucket.Large, flotation type, all weather 16.5L x 16.1 tires are mounted on high capacity eight bolt wheels and hubs.
Financing and Leasing Available OAC.
Deliveries are available, ask your salesperson for details.
Prices are subject to applicable taxes.
Flaman Sales , Nisku, Alberta
$46,200.00 CAD / $36,874.45 USD
Schulte Series 5 XH1000 10' Rotary Cutter
- Cutting width: 126"
- Overall width: 139"
- Overall length: 192"
- Transport width: min 88"
- Transport height: 88"
- Weight, approx.: 5200 lbs
- Minimum tractor HP: 50 HP
- Recommended tractor HP: 75 HP
- Cutting height: 1.5 to 17.5"
- Ground clearance: 17.5"
- Cutting capacity: 4" material
- Safety Light Kit
- 1000 RPM
- CW Super Updraft 5" Blades
- Front Rubber Shield
- Pioneer Ends
- Open Clevis
- Single Axle Wing
- Flex Arm Mount
- Optional Skid Steer Tires
Deliveries are available, ask your salesperson for details.
Prices are subject to applicable taxes.
Flaman Sales , Nisku, Alberta
$42,200.00 CAD / $33,681.86 USD
Schulte 2500 Giant Rock Picker Reel Type (Wide Grate)
- Large 2.5 cubic yard (1.9 M³ ) hopper.
- Minimum Till Wide Grate & Reel. Good for spot picking in fields where you want to reduce trash and residue picked
- Durable tapered T-iron grate with 1-1/2” (38mm) thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.
- Batt tubing has 3/8” thick walls.
- Wrap around, hard surfaced batt teeth offer strength and wear resistance.
- Large heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.
- Floating grate protects the machine from damage due to large immovable rocks.
- Pivoting hitch pole allows the rock picker to be quickly moved from the offset picking position to a centered transport position.
- Large 16.5L X 16.1 tires provide superior flotation
- Weight (approximate): 4970 lbs (2254 Kg)
- Minimum tractor size: 75 HP
- Normal maximum ground speed: 4 MPH (6.4 KPH)
- Tractor hydraulic requirement: 12 GPM @1800 PSI, dual remote outlets
The Schulte 2500 Giant Rock Picker is a hydraulically driven, reel type rock picker capable of picking 2” - 2
Flaman Sales , Nisku, Alberta
$172,500.00 CAD / $137,680.58 USD
NEW
New Unit, Pre 2022 steel surcharges. Demoed for 120 acres
Keystone Agri-Motive (2005) Inc. , Steinbach, Manitoba
$8,200.00 CAD / $6,544.82 USD
*110 in. wide; *hyd spout; *side discharge of blower fan; *1000 Pto -- 110 inches
Mazergroup , Yorkton, Saskatchewan
$28,900.00 CAD / $23,066.49 USD
Hydraulic Drive, 2.5 Yard Hopper, 5 Foot Apron, Long Hitch, 16.5X16.1 SL Tires
Hergott Farm Equipment Ltd , Humboldt, Saskatchewan
Contact dealer for price
2021, Special Financing Available! Choose from: Option 1) 0% for the first 12 months and then 4.79% for a total Option (minimum 24 months) 2) 60 months or 3.25% Fixed for 60 months. Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4? input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box, All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4? diameter pins for strength. Extra large 10.5 X 27 skid steer tires, 29? foam or air filled aircraft tires or 26? laminated tires, allow for greater transport height along with improved performance in wet conditions, Phased hydraulic cylinders are standard to provide level lifting across the width of the cutter. Centre and wing sections all raise and lower together. Cutting height is controlled by the centre depth stop for one touch levelling.
Van L Equipment , Reston, Manitoba
