View Listing

Used 2018 MacDon FD75-40 Header

$89,500.00 CAD / $67,679.98 USD


  • Stock #: 135003
  • Location: Taber, Alberta
  • Hours: 1

40', FLEX, DOUBLE KNIFE, SLOW SPEED TRANSPORT, UPPER CROSS AUGER, .

Rocky Mountain Equipment , Taber, Alberta

View Listing
View Listing

Used 2018 MacDon FD145 Header

$119,500.00 CAD / $90,366.00 USD


  • Stock #: HC100305
  • Location: Crossfield, Alberta

Stabilizer Wheels; Stab Whls w/Slow Speed Trnsprt; Upper Cross Auger; *BRACE KIT FOR CENTER REEL ARM; *KIT - 45FT DK SPARE KNIVES; *TRANSPORT - TOW POLE; *100 SERIES TRANSPORT INFO PKG; *INCAB SIDE DRPR SPEED CTRL-GEN; *TRANSPORT SUPPORTS AND HUBS; *1 SERIES 45' UCA; *TRANSPORT LIGHTS - NA / AUS; *KIT-MC RAPID REEL CONVERSION; *SLOW SPEED TRANSPORT(1-SERIES); *FM100 ADAPTOR-LEX NRW 40/45DK

Alberta AG Centre , Crossfield, Alberta

View Listing
View Listing

Used 2017 MacDon FD75-35 Header

$80,000.00 CAD / $60,496.07 USD


  • Stock #: 142989
  • Location: Vermillion,, Alberta

Rocky Mountain Equipment , Vermillion,, Alberta

View Listing
View Listing

Used 2017 MacDon FD75 Header

$99,000.00 CAD / $74,863.88 USD


  • Stock #: 14308-1
  • Location: Vegreville, Alberta

*35 Ft. (10.6 m) Single Knife Drive FlexDraper® Header; *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. Required to insert a CA25 Combine Adapter into a D65 Draper Header configured for SP Windrowing Application.; *Driveline for 2017 and Newer Combines; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *35' Upper Cross Auger; *35' - 5 Bat to 6 Bat Plastic Fingers; *35' SK - Coarse Serration; *CA25 European Adapter Seal Kit~FD75 draper headers have improved sealing of feed pan and front transition area. B5612 European Seed Loss Kit provides additional sealing around the sides of the feed deck and feed auger, recommended for extremely delicate seed.; *10 Volt Auto Header Height Sensor for Some New Holland Units~Required on all Belgian made CR/CX models. Other NH combines use a 5 volt AHHC system. It is the responsibility of the ordering dealer to correctly specify the voltage of the combine.; *D60/FD70 Rock Ret Kit-30/35

Webb's Machinery (Vermilion) Ltd. , Vegreville, Alberta

View Listing
View Listing

Used 2017 MacDon FD75 Header

$99,000.00 CAD / $74,863.88 USD


  • Stock #: 14307-1
  • Location: Vegreville, Alberta

*35 Ft. (10.6 m) Single Knife Drive FlexDraper® Header; *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. Required to insert a CA25 Combine Adapter into a D65 Draper Header configured for SP Windrowing Application.; *Driveline for 2016 and Older Combines; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *35' Upper Cross Auger; *35' SK - Coarse Serration; *30' & 35' Rock Retarder Kit; *CA25 European Adapter Seal Kit~FD75 draper headers have improved sealing of feed pan and front transition area. B5612 European Seed Loss Kit provides additional sealing around the sides of the feed deck and feed auger, recommended for extremely delicate seed.

Webb's Machinery (Vermilion) Ltd. , Vegreville, Alberta

View Listing
View Listing

Used 2019 MacDon PW8 Header

$24,000.00 CAD / $18,148.82 USD


  • Stock #: 142447
  • Location: Drumheller, Alberta

Rocky Mountain Equipment , Drumheller, Alberta

View Listing
View Listing

Used 2011 MacDon FD70-40 Header

Contact dealer for price


  • Stock #: 0QA14A
  • Location: Lacombe, Alberta

40' Flex Draper; Lexion Mount; Transport Kit; Upper Cross Auger. -- 40 feet

Alberta Harvest Centre , Lacombe, Alberta

View Listing
View Listing

Used 2016 MacDon FD75-40 Header

$83,500.00 CAD / $63,142.77 USD


  • Stock #: HC100290
  • Location: Crossfield, Alberta

*2016 FD75-40 Flex Draper Combine Header; *John Deere 50/60/70/S Adapter; *Dual Span Reel; *Double Knife Drive; *Upper Cross Augers; *Slow Speed Transport Kit; *Short Brace Kit

Alberta AG Centre , Crossfield, Alberta

View Listing
View Listing

Used 2017 MacDon FD75-40 Header

$87,500.00 CAD / $66,167.57 USD


  • Stock #: HC100291
  • Location: Crossfield, Alberta

*2017 FD75-40 Flex Draper Combine Header; *John Deere 50/60/70/S Adapter; *Dual Span Reel; *Double Knife Drive; *Upper Cross Augers; *Slow Speed Transport Kit; *Short Brace Kit

Alberta AG Centre , Crossfield, Alberta

View Listing
View Listing

Used 2005 MacDon 973 Header

$15,000.00 CAD / $11,343.01 USD


  • AgDealer Equipment #: 982722
  • Location: Waskatenau,, Alberta

2005 974 Mac Don 36 ft Draper Header 36' DRAPER PLATFORM; ADAPTER for a CX / CR New holland or newer CASE combine. ; Single KNIFE DRIVE; FACTORY TRANSPORT; HYD FORE & AFT; HYD TILT; SPLIT PICKUP REEL; Just had a full service. All rollers removed and bearings greased. Hydraulic motor seals replaced. Newer canvases. Call or text Paul @ 780-656-5808

Hammerstrap Industries Inc, , Waskatenau,, Alberta

View Listing
View Listing

Used 2001 MacDon 962 Header

$12,500.00 CAD / $9,452.51 USD


  • AgDealer Equipment #: 982721
  • Location: Waskatenau,, Alberta

962 Mac Don 30 ft Draper Header 30' DRAPER PLATFORM; ADAPTER for a TR / TX New holland was on a TR99 combine. gauge wheels; single KNIFE DRIVE; FACTORY TRANSPORT; FORE & AFT. Newer canvases. Call or text Paul @ 780-656-5808

Hammerstrap Industries Inc, , Waskatenau,, Alberta

View Listing
View Listing

Used 2006 MacDon 974 Header

$25,000.00 CAD / $18,905.02 USD


  • AgDealer Equipment #: 982720
  • Location: Waskatenau,, Alberta

2006 974 Mac Don 35 ft Flex Draper Header 35' DRAPER PLATFORM; ADAPTER for a John Deere combine. Single point hook up. Fits a JD 9650 to S690. AUTO HEIGHT CONTROL; DOUBLE KNIFE DRIVE; FACTORY TRANSPORT; HYD FORE & AFT; HYD TILT; SPLIT PICKUP REEL; UPPER CROSS AUGER Just had a full service. All rollers removed and bearings greased. Hydraulic motor seals replaced. Newer canvases. Single point hook up. Call or text Paul @ 780-656-5808

Hammerstrap Industries Inc, , Waskatenau,, Alberta

View Listing