View Listing

Used 2015 MacDon FD75-40 SKD Header

$78,000.00 CAD / $59,297.55 USD


  • Stock #: UH3946
  • AgDealer Equipment #: 893455
  • Location: Davidson
  • Hours: 0

*40 Ft. (12.2 m) Single Knife Drive FlexDraper Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088~To ensure customer satisfaction, Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size, rear ballast, unloading auger capability, and feeder lift cylinder capacity, etc.; *Stabilizer Wheels / Slow Speed Transport~Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *40' to 45' Upper Cross Auger

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2017 MacDon FD75-40 DKD Header

$92,000.00 CAD / $69,940.70 USD


  • Stock #: UH4070
  • AgDealer Equipment #: 914186
  • Location: Davidson
  • Hours: 0

Double Knife; Slow Speed Transport; Stabilizer Wheels; Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Heavy Duty Poly Material reel finger - single finger - 6 inch spacing, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088; *40' to 45' Upper Cross Auger; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CNH 6T Driveline - CA25. Part for Case Combine years 2016 and older. If you are putting this on a 2017 or newer combine you will need part B6364

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2016 MacDon FD75-40 DKD Header

$84,000.00 CAD / $63,858.90 USD


  • Stock #: UH4062
  • AgDealer Equipment #: 914185
  • Location: Davidson
  • Hours: 0

*40' to 45' Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~For 30', 35', 40', 45'. NOTE: for slow speed towing behind a Combine or Pick-up ONLY - do not exceed 25 MPH (40 km/h). Transport MUST not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2014 MacDon FD75-40 DKD Header

$72,000.00 CAD / $54,736.20 USD


  • Stock #: UH4103
  • AgDealer Equipment #: 914180
  • Location: Moose Jaw
  • Hours: 0

*40 Ft.Double Knife Drive Draper Header; *CA25 Adapter Installed and Fully Assembled for CIH 7/8010, 7/8120, 5/6/7088, 5/6/7/8/9130; *Stabilizer Wheels / Slow Speed Transport; *40' to 45' Upper Cross Auger; *Outboard Skid Shoes with Poly; *Inboard Skid Shoes with Poly -- 40 feet

Young's Equipment Inc. , Moose Jaw, Saskatchewan

View Listing
View Listing

Used 2015 MacDon FD75-40 DKD Header

$82,000.00 CAD / $62,338.45 USD


  • Stock #: UH4074
  • AgDealer Equipment #: 914177
  • Location: Davidson
  • Hours: 0

*40' to 45' Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive Draper Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088~To ensure customer satisfaction, Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size, rear ballast, unloading auger capability, and feeder lift cylinder capacity, etc.

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2014 MacDon FD75-40 DKD Header

$72,000.00 CAD / $54,736.20 USD


  • Stock #: UH4101
  • AgDealer Equipment #: 914175
  • Location: Moose Jaw
  • Hours: 0

*40 Ft.Double Knife Drive Draper Header; *CA25 Adapter Installed and Fully Assembled for CIH 7/8010, 7/8120, 5/6/7088, 5/6/7/8/9130; *Stabilizer Wheels / Slow Speed Transport; *40' to 45' Upper Cross Auger; *Outboard Skid Shoes with Poly; *Inboard Skid Shoes with Poly - -- 40 feet

Young's Equipment Inc. , Moose Jaw, Saskatchewan

View Listing
View Listing

Used 2017 MacDon FD75-40 DKD Header

$92,000.00 CAD / $69,940.70 USD


  • Stock #: UH4072
  • AgDealer Equipment #: 914174
  • Location: Davidson
  • Hours: 0

Double Knife; Slow Speed Transport; Stabilizer Wheels; Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Heavy Duty Poly Material reel finger - single finger - 6 inch spacing, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088; *40' to 45' Upper Cross Auger; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CNH 6T Driveline - CA25. Part for Case Combine years 2016 and older. If you are putting this on a 2017 or newer combine you will need part B6364

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2017 MacDon FD75-40 DKD Header

$92,500.00 CAD / $70,320.81 USD


  • Stock #: UH4068
  • AgDealer Equipment #: 914168
  • Location: Davidson
  • Hours: 0

Double Knife; Slow Speed Transport; Stabilizer Wheels; Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Heavy Duty Poly Material reel finger - single finger - 6 inch spacing, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088; *40' to 45' Upper Cross Auger; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CNH 6T Driveline - CA25. Part for Case Combine years 2016 and older. If you are putting this on a 2017 or newer combine you will need part B6364

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2014 MacDon FD75-40 DKD Header

$72,000.00 CAD / $54,736.20 USD


  • Stock #: UH4102
  • AgDealer Equipment #: 914169
  • Location: Moose Jaw
  • Hours: 0

*40 Ft. Double Knife Drive Draper header; *CA25 Adapter Installed and Fully Assembled for CIH 7/8010, 7/8120, 5/6/7088, 5/6/7/8/9130; *Stabilizer Wheels / Slow Speed Transport; *40' to 45' Upper Cross Auger~; *Outboard Skid Shoes with Poly; *Inboard Skid Shoes with Poly; *21T spline shaft for 2017 or newer(6 spline available for 2016 or older-call Dale S) -- 40 feet

Young's Equipment Inc. , Moose Jaw, Saskatchewan

View Listing
View Listing

Used 2018 MacDon FD75-40 DKD Header

$104,000.00 CAD / $79,063.40 USD


  • Stock #: UH4086
  • AgDealer Equipment #: 914164
  • Location: Regina
  • Hours: 0

*Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators, knife reverser, seed saver, inboard and outboard adjustable skid shoes; *CA25 Adapter installed and fully assembled for CIH 10/20/30/40 Series, 5/6/7088 ? Note 1 - See Section 3; *Driveline for 2017 and newer combines - 21 Tooth Spline Driveline; *Stabilizer Wheels / Slow Speed Transport Package (30', 35', 40', 45') NOTE: for slow speed towing behind a combine or pick-up ONLY - Do not exceed 20 MPH (32 km/h) Stabilizer Wheels / Slow Speed Transport ?; *Upper Cross Auger

Young's Equipment Inc. , Regina, Saskatchewan

View Listing
View Listing

Used 2016 MacDon FD75-40 DKD Header

$84,000.00 CAD / $63,858.90 USD


  • Stock #: UH4063
  • AgDealer Equipment #: 914162
  • Location: Davidson
  • Hours: 0

*40' to 45' Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~For 30', 35', 40', 45'. NOTE: for slow speed towing behind a Combine or Pick-up ONLY - do not exceed 25 MPH (40 km/h). Transport MUST not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2017 MacDon FD75-40 DKD Header

$92,500.00 CAD / $70,320.81 USD


  • Stock #: UH4069
  • AgDealer Equipment #: 914163
  • Location: Davidson
  • Hours: 0

Double Knife; Slow Speed Transport; Stabilizer Wheels; Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Heavy Duty Poly Material reel finger - single finger - 6 inch spacing, Hydraulic Reel Fore-Aft adjustment (cylinders), 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088; *40' to 45' Upper Cross Auger; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *CNH 6T Driveline - CA25. Part for Case Combine years 2016 and older. If you are putting this on a 2017 or newer combine you will need part B6364

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing