Contact dealer for price
Recently Added
Kello Bilt 225-16' Offset Disc Call your local Flaman store for details! Delivery options are available, ask your salesperson for details.Finance and lease options available OAC.Prices are subject to applicable taxes.
$24,800 CAD / $17,979 USD
2-14 FT KELLOBILT DISCS, 5/16 INCH KNOTCHED FRONT & REAR BLADES, BLADES MEASURE 25 INCH
$26,000 CAD / $18,849 USD
Kello-bilt 225-8, 8ft off set disc, 28" notched blades
$78,600 CAD / $223,640 USD
KELLO-BILT 225, 19.5FT, 3 sections, Transport width 11ft, light kit, 28" notched blades Demo model
$33,000 CAD / $23,923 USD
Kello-Bilt 225-10, 10ft off set disc, 28" Notched blades, light kit. DEMOED ONCE
$35,000 CAD / $25,788 USD
Kello-Bilt 12Ft. Model 225, 7,220 lbs. 28" Notched Blades, with Light Kit
$68,000 CAD / $49,297 USD
Oil Bath Bearing: Features back-to-back tapered roller bearings, operating in 90W gear oil and sealed with Duo-Cone TM seals. Welded Spacer Spool: Fabricated steel spacer spools, which will not shatter nor compress, provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure. Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8? rectangular tubing for maximum support. Gang Bar: Fabricated as a single welded for maximum stability, with no U-bolts to stretch and loosen that can cause loose disc assemblies or bearing failures.
$133,500 CAD / $96,781 USD
Kello-Bilt 225DOW - 38' Tandem Disc (Ask about other models Kello-Bilt available) *Pre-Selling This model features a four section design for maximum flexibility and weight distribution, with folding wings with narrow width for ease of transportation. Take care of crop residue, and hard dry soil with ease. Features of Kello-Bilt Tandem Disc: Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricated as a single piece of steel for maximum stability. There are no U-Bolts to become stretched and loosened that can cause disc assemblies or bearing failure. Heavy Duty Construction: Assembly is done with Gra
Contact dealer for price
Kello Bilt 225-16' Offset DiscCall your local Flaman store for details! Delivery options are available, ask your salesperson for details.Finance and lease options available.Prices are subject to applicable taxes.
Contact dealer for price
Kello Bilt 225-16' Offset Disc Call your local Flaman store for details! Delivery options are available, ask your salesperson for details.Finance and lease options available.Prices are subject to applicable taxes.
Contact dealer for price
10ft Offset Disc with 27“ blades Call for details!
Contact dealer for price
2021 KELLO-BILT 225TSW-5428B 21FT Tandem Field Disc, 251/2 Inch Smooth Blades Call for details!
$82,800 CAD / $60,026 USD
Size: 24 ft, Kind: 3-Section Folding, Spacing: 11", Breaking Disc, 12.5L/15 SL Tires, Notched Disc Type, Contact Your Local Pattison Ag Location For Available Date -- Size: 24 ft Kind: 3-Section Folding Breaking Disc 12.5L/15 SL Tires Notched Disc Type Spacing: 11"
$49,400 CAD / $35,813 USD
KELLO-BILT Series 225 Double Offset 30 Ft Tandem Disc • 20 inch smooth front discs • 23 inch serrated rear discs • 10 inch spacing • mud scrapers • 3 section disc • oil bath bearings • 11L-15 tires • heavy duty breaking disc Tillage and other field equipment available. Call or text Paul to discuss further at 780-656-5808
$99,000 CAD / $71,770 USD
Kello Bilt 225TSW-23' Tandem Disc *Pre-Selling Looking for a versatile disc harrow to handle light to medium soil tilling? Look no further than the Kello-Bilt Tandem Disc available from Flaman Agriculture. This heavy-duty disc harrow is designed for the efficient cultivation of light and medium soil with crop residue. The three-section folding wing design allows for narrow transport on roads, along with even weight distribution while tilling your fields. Take care of crop residue and hard, dry soil with ease. Features of Kello-Bilt Tandem Disc Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricat
$39,600 CAD / $28,708 USD
Kello-Bilt 225 - 14' Offset Breaking Disc *Pre-Selling Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 26" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support a
$42,700 CAD / $30,955 USD
Kello-Bilt 275 - 12' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 26" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support and long life
$69,900 CAD / $50,674 USD
Kello-Bilt 225DOW - 38' Breaking Disc It has notched blades front and back. Blades measure about 24.5" Front and 25" Back. Was not used a lot. Recent extensive repairs and welding fixes in shop. Transport Width: 21' Transport Height: 17' Weight: 26,938 lb. (12,219 kg) LBS Per Blade: 313 Suggested Drawbar HP: 400+ This model features a four section design for maximum flexibility and weight distribution, with folding wings with narrow width for ease of transportation. Take care of crop residue, and hard dry soil with ease. Features of Kello-Bilt Tandem Discs: Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum suppor
$95,000 CAD
2023 Kellobilt 225TSW - 23', oil bath bearings, 28" disc's, 3 Plex,
$51,000 CAD
2023 Kello-Bilt 275 16', oil bath bearings, notched 28" blades
$55,300 CAD / $40,090 USD
Kello-Bilt 275 - 16' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 28" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support and long life
$41,500 CAD / $30,086 USD
Kello-Bilt 225 - 16' Offset Breaking Disc *Pre-Selling Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 26" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support a