$1,614 CAD / $1,170 USD
Recently Added
Bale Spear - Base: 2014XF - Primary Spears: Three at 49 Inches x 2 Inches (Approx. 44 Inches Usable Length) - Capacity: One Large Round Bale (2,500 Pounds) or One Large Square Bale (2,500 Pounds) - Dimensions: 20 Inches High x 46 Inches Wide x 54 Inches Long - Fits on Global Series Loaders - Operational weight: 173 Pounds -- New
$22,648 CAD / $16,387 USD
Recently Added
15 ft. Cutting Width Rear Discharge
$3,250 CAD / $2,351 USD
6 Ft. Boom Mounted Front Blade with Manual Angle for 300/400/500 Series Carrier. -- AF11E - 6 Ft. Boom Mounted Front Blade with Manual Angle for 300/400/500 Series Carrier
$2,179 CAD / $1,580 USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
$1,655 CAD / $1,200 USD
72 Inch - Category 0 - Category 1 - 3 Point Mount - Box Blade -- 72 Inch 3 Point Mount
$2,902 CAD / $2,100 USD
Post Hole Digger – Base: 1228XF – Boom Outside Diameter: 3 1/2 Inch Reinforced - Yoke Outside Diameter: 2 7/8 Inch Reinforced - Auger Speed: 135 RPM - Gearbox Gear Ratio: 4:1 - Gearbox Horsepower Rating: 90 - PTO Horsepower Range: 40 to 90 - 3 Point Hitch Category: Category I or II - Works with Auger Model Numbers: PHA106, PHA109, PHA112, PHA118, PHA124, PHA132 - Weight: 260 Pounds - 12 Inch x 48 Inch Auger
$1,697 CAD / $1,230 USD
Broadcast Spreader - Base: 3072XF - Hopper Material: Polyethylene - Hopper Weight Capacity: 678 Pounds - Hopper Volume Capacity: 10.6 Cubic Feet + Machine Weight: 125 Pounds - Swath Spread: 46 Feet - Hopper Width: 42 Inches - Hopper Height: 40 Inches - Tractor PTO Horsepower Range: 16 to 55 - PTO RPM: 540 RPM - PTO Shaft Category I (Heavy Duty Shielded 1 3/8 Inches) 3 Point Hitch: Category 1 - iMatch Hitch Compatible (1000)
$1,228 CAD / $890 USD
Box Blade - Base: 1741XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 48 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 360 Pounds - Warranty: 1 Year