View Listing

Used 2014 MacDon FD75-40 Header

$71,500.00 CAD / $53,925.64 USD


Recently Added

  • Stock #: UH4224
  • Location: Regina, Saskatchewan

*40 Ft. (12.2 m) Double Knife Drive Draper Header~Flex frame, Pointed Profile / Double Heat Treated forged steel guards, Coarse Serration sections - 9 teeth per inch, Pick-up design reel type - flip over action, split reel span - 2 reels connected mid-header - 3 reel lift arms, 5 bats, Poly Material - single finger - 6 inch spacing - Heavy Duty material, Hydraulic Reel Fore-Aft adjustment (cylinders), Cutterbar Poly factory installed. USUP (Hrs): 3.5.; *CA25 Adapter Installed and Fully Assembled for CIH 7/8010, 7/8120, 5/6/7088, 5/6/7/8/9130~To ensure customer satisfaction, Dealer should adhere to combine manufacturer specifications for header compatibility. Ensure manufacturer combine specifications allow for adequate tire size, rear ballast, unloading auger capability, and feeder lift cylinder capacity, etc.; *Stabilizer Wheels / Slow Speed Transport~USUP (Hrs): 5.5. Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for D65/FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *40' to 45' Upper Cross Auger~USUP (Hrs): 3.5.; *Outboard Skid Shoes with Poly~USUP (Hrs): 0.85.; *Inboard Skid Shoes with Poly - Qty 2 Sets~USUP (Hrs): 0.85. Can order two sets for 30' and larger headers. 55 lbs/each set; $613.00/each set.

Young's Equipment Inc. , Regina, Saskatchewan

View Listing
View Listing

Used 2011 Case IH 3020-35 Header

$30,000.00 CAD / $22,626.14 USD


Recently Added

  • Stock #: UH4205
  • Location: Davidson, Saskatchewan

*BASE UNIT *BASE UNIT; *CUTTERBAR SYSTEM *Cutterbar 3 in. standard guard; *CUTTERBAR SUSPENSION *Manual cutterbar suspension standard; *PICK-UP REELS > 6 Bat Pickup Reel w/Plastic Ti *6 Bat Pickup w/plastic tines Pickup reel, plastic tine, 6 Bat 20 ft. 25 ft. 30 ft. 35 ft.; *END DIVIDERS *Medium divider standard Medium divider and supports standard; *CROP DIVIDERS *No Crop divider rod; *SPARE KNIFE SET *No spare knife taken; *AUGER STRIPPER BARS *Third stripper bars FI; *AUTO HEADER HEIGHT *No header height control No rigid header height control; *REEL TINE FLAP KIT *No Reel tine flap kit

Young's Equipment Inc. , Davidson, Saskatchewan

View Listing
View Listing

Used 2016 MacDon FD75-40 Header

$79,500.00 CAD / $59,959.27 USD


Recently Added

  • Stock #: UH4206
  • Location: Weyburn, Saskatchewan

Double Knife; Slow Speed Transport; Upper Cross Auger; *40' to 45' Upper Cross Auger; *40 Ft. (12.2 m) Double Knife Drive FlexDraper® Header~ 2 outboard and 4 inboard skid shoes, Cutterbar Poly factory installed.; *Stabilizer Wheels / Slow Speed Transport~; *CA25 Adapter Installed and Fully Assembled for CIH 10/20/30/40 Series, 5/6/7088

Young's Equipment Inc. , Weyburn, Saskatchewan

View Listing
View Listing

Used 2012 Case IH 2162-45 Header

$58,000.00 CAD / $43,743.87 USD


Recently Added

  • Stock #: UH4204
  • Location: Regina, Saskatchewan

*Stabilizer whls w/slow speed transport; *Lodged crop reel end finger kit; *Adaptor for 88/10/20/30-series; *5 Bat reel; *Upper Cross Auger

Young's Equipment Inc. , Regina, Saskatchewan

View Listing
View Listing

Used 2001 MacDon 962-30 Header

$8,000.00 CAD / $6,033.64 USD


Recently Added

  • Stock #: UH4200
  • Location: Moose Jaw, Saskatchewan

*Macdon 962 draper header @ 30'; *Bat Reel; *871 Adapter 16/21/23/2588 Series; *Hyd Fore/aft; *Gauge Wheels; *No Pea Auger; *Header trailer not included

Young's Equipment Inc. , Moose Jaw, Saskatchewan

View Listing
View Listing

Used 2002 New Holland 94C-30 Header

$16,500.00 CAD / $12,444.38 USD


Recently Added

  • Stock #: UH4195
  • Location: Assiniboia, Saskatchewan

*30ft New Holland (Honey Bee) Combine Draper Header; *Case IH Adapter (21/23/25 Series); *Transport Package; *U2 Pickup Reel; *Newer Canvasses

Young's Equipment Inc. , Assiniboia, Saskatchewan

View Listing
View Listing

Used 2018 MacDon FD75-40 DKD Header

$104,000.00 CAD / $78,437.29 USD


Recently Added

  • Stock #: UH4083
  • Location: Regina, Saskatchewan

*Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators, knife reverser, seed saver, inboard and outboard adjustable skid shoes; *CA25 Adapter installed and fully assembled for CIH 10/20/30/40 Series, 5/6/7088 ? Note 1 - See Section 3; *Driveline for 2017 and newer combines - 21 Tooth Spline Driveline; *Stabilizer Wheels / Slow Speed Transport Package (30', 35', 40', 45') NOTE: for slow speed towing behind a combine or pick-up ONLY - Do not exceed 20 MPH (32 km/h) Stabilizer Wheels / Slow Speed Transport ?; *Upper Cross Auger

Young's Equipment Inc. , Regina, Saskatchewan

View Listing
View Listing

Used 2010 MacDon D60 Header

$30,900.00 CAD / $23,304.92 USD


Recently Added

  • Stock #: 05567B
  • Location: Hartney, Manitoba

COMING SOON 40' Double Knife Split Reel Poly Skid Slow Speed Transport Hyd Fore/Aft Hyd Center Link Plastic Fingers Outboard Skid Shoes Float Indicator Auto Header Tilt

Mazergroup , Hartney, Manitoba

View Listing
View Listing

Used 2014 MacDon PW7 Header

$20,000.00 CAD / $15,084.09 USD


  • Stock #: 140431
  • Location: Yorkton, Saskatchewan

Rocky Mountain Equipment , Yorkton, Saskatchewan

View Listing
View Listing

Used 2016 John Deere 635F Header

$33,000.00 CAD / $24,888.75 USD


  • Stock #: 207478
  • Location: Swift Current, Saskatchewan

2016 John Deere 635F Header, 35' Flex, Poly Cutter Bar, Poly Skid Plates, Pick-Up Reel, Automatic Height Sensing, Single Knife, Hydraulic Fore/Aft Reel adjustment, Manual Center Link, Crop Dividers, Stubble Lights Auger with Full Width Fingers -- Auger with full width fingers; HHS; Options: Flip Over Reel; Platform Kind: Flexible; Platform size: 35 Feet

Pattison Agriculture , Swift Current, Saskatchewan

View Listing
View Listing

Used 2016 John Deere 635F Header

$33,000.00 CAD / $24,888.75 USD


  • Stock #: 207477
  • Location: Swift Current, Saskatchewan

2016 John Deere 635F Header, 35' Flex, Poly Cutter Bar, Poly Skid Plates, Pick-Up Reel, Single Reel, Flip Over Reel Kit, Automatic Height Sensing, Single Knife, Hydraulic Fore/Aft Reel adjustment, Crop Dividers, Stubble Lights Auger with Full Width Fingers, -- Auger with full width fingers; HHS; Options: Flip Over Reel; Platform Kind: Flexible; Platform size: 35 Feet

Pattison Agriculture , Swift Current, Saskatchewan

View Listing
View Listing

Used 2006 John Deere 635F Header

$22,500.00 CAD / $16,969.61 USD


  • Stock #: 99006
  • Location: Saskatoon, Saskatchewan

full finger auger no dents in auger floor in good shape reels are straight one year on new sections in knife comes with trailtech header transport; Platform Kind: Flexible; Platform size: 35 Feet

Cervus Equipment , Saskatoon, Saskatchewan

View Listing