View Listing

Used 2015 New Holland 840CD-30 Header

$20,500.00 CAD / $15,502.12 USD


  • Stock #: 143042
  • Location: Camrose, Alberta

30' HEADER, RIGID HEADER, INTEGRATED TRANSPORT, PICKUP REEL, PLASTIC FINGERS, CROSS AUGER, SINGLE KNIFE DRIVE, SNH, HHC, HYD CENTER LINK

Rocky Mountain Equipment , Camrose, Alberta

View Listing
View Listing

Used 2015 John Deere 635D Header

$37,200.00 CAD / $28,130.67 USD


  • Stock #: 142909
  • Location: Taber, Alberta

DOUBLE KNIFE DRIVE, UPPER CROSS AUGER, RIGID, DRAPER, INTEGRATED TRANSPORT, PICKUP REEL, HHC, PLASTIC PU TEETH

Rocky Mountain Equipment , Taber, Alberta

View Listing
View Listing

Used 2018 MacDon FD75-40 Header

$89,500.00 CAD / $67,679.98 USD


  • Stock #: 135003
  • Location: Taber, Alberta
  • Hours: 1

40', FLEX, DOUBLE KNIFE, SLOW SPEED TRANSPORT, UPPER CROSS AUGER, .

Rocky Mountain Equipment , Taber, Alberta

View Listing
View Listing

Used 2018 MacDon FD145 Header

$119,500.00 CAD / $90,366.00 USD


  • Stock #: HC100305
  • Location: Crossfield, Alberta

Stabilizer Wheels; Stab Whls w/Slow Speed Trnsprt; Upper Cross Auger; *BRACE KIT FOR CENTER REEL ARM; *KIT - 45FT DK SPARE KNIVES; *TRANSPORT - TOW POLE; *100 SERIES TRANSPORT INFO PKG; *INCAB SIDE DRPR SPEED CTRL-GEN; *TRANSPORT SUPPORTS AND HUBS; *1 SERIES 45' UCA; *TRANSPORT LIGHTS - NA / AUS; *KIT-MC RAPID REEL CONVERSION; *SLOW SPEED TRANSPORT(1-SERIES); *FM100 ADAPTOR-LEX NRW 40/45DK

Alberta AG Centre , Crossfield, Alberta

View Listing
View Listing

Used 2007 John Deere 930D Header

$28,500.00 CAD


  • Stock #: QZ50A2
  • Location: Lacombe, Alberta

30'. -- 30 feet

Alberta Harvest Centre , Lacombe, Alberta

View Listing
View Listing

Used 2015 John Deere 635D Header

$37,200.00 CAD / $28,130.67 USD


  • Stock #: 142908
  • Location: Taber, Alberta

DOUBLE KNIFE DRIVE, UPPER CROSS AUGER, RIGID, DRAPER, INTEGRATED TRANSPORT, PICKUP REEL, HHC, PLASTIC PU TEETH

Rocky Mountain Equipment , Taber, Alberta

View Listing
View Listing

Used 2017 MacDon FD75-35 Header

$80,000.00 CAD / $60,496.07 USD


  • Stock #: 142989
  • Location: Vermillion,, Alberta

Rocky Mountain Equipment , Vermillion,, Alberta

View Listing
View Listing

Used 2015 New Holland 720CG-30 Header

$19,600.00 CAD / $14,821.54 USD


  • Stock #: 142988
  • Location: Red Deer, Alberta

RIGID, AUGER, SKD, TRANSPORT, 6 BATT PICKUP REEL, HHC, STEEL PICKUP TEETH, CNH ADAPTER, .

Rocky Mountain Equipment , Red Deer, Alberta

View Listing
View Listing

Used 2017 MacDon FD75 Header

$99,000.00 CAD / $74,863.88 USD


  • Stock #: 14308-1
  • Location: Vegreville, Alberta

*35 Ft. (10.6 m) Single Knife Drive FlexDraper® Header; *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. Required to insert a CA25 Combine Adapter into a D65 Draper Header configured for SP Windrowing Application.; *Driveline for 2017 and Newer Combines; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *35' Upper Cross Auger; *35' - 5 Bat to 6 Bat Plastic Fingers; *35' SK - Coarse Serration; *CA25 European Adapter Seal Kit~FD75 draper headers have improved sealing of feed pan and front transition area. B5612 European Seed Loss Kit provides additional sealing around the sides of the feed deck and feed auger, recommended for extremely delicate seed.; *10 Volt Auto Header Height Sensor for Some New Holland Units~Required on all Belgian made CR/CX models. Other NH combines use a 5 volt AHHC system. It is the responsibility of the ordering dealer to correctly specify the voltage of the combine.; *D60/FD70 Rock Ret Kit-30/35

Webb's Machinery (Vermilion) Ltd. , Vegreville, Alberta

View Listing
View Listing

Used 2017 MacDon FD75 Header

$99,000.00 CAD / $74,863.88 USD


  • Stock #: 14307-1
  • Location: Vegreville, Alberta

*35 Ft. (10.6 m) Single Knife Drive FlexDraper® Header; *CA25 Adapter Installed and Fully Assembled for NH CR/CX~New Holland 70 mm feeder lift cylinders required on all CR/CX models to lift 30' and larger headers. NH kit #84060212. Required to insert a CA25 Combine Adapter into a D65 Draper Header configured for SP Windrowing Application.; *Driveline for 2016 and Older Combines; *Stabilizer Wheels / Slow Speed Transport~For slow speed towing behind a Combine or Pick-up Only - do not exceed 25 MPH (40 km/h). Transport must not exceed 25 mph (40 kph) when being towed behind a Pick-up Truck. C1997 Slow Speed Transport Package is for FD75 only. Must order C1983 for 2012 and older D50/D60/FD70.; *35' Upper Cross Auger; *35' SK - Coarse Serration; *30' & 35' Rock Retarder Kit; *CA25 European Adapter Seal Kit~FD75 draper headers have improved sealing of feed pan and front transition area. B5612 European Seed Loss Kit provides additional sealing around the sides of the feed deck and feed auger, recommended for extremely delicate seed.

Webb's Machinery (Vermilion) Ltd. , Vegreville, Alberta

View Listing
View Listing

Used 2019 MacDon PW8 Header

$24,000.00 CAD / $18,148.82 USD


  • Stock #: 142447
  • Location: Drumheller, Alberta

Rocky Mountain Equipment , Drumheller, Alberta

View Listing
View Listing

Used 2008 Case IH 2152-35 Header

$20,500.00 CAD / $15,502.12 USD


  • Stock #: 142871
  • Location: Picture Butte, Alberta

SLOW SPEED TRANSPORT, CNH ADAPTER

Rocky Mountain Equipment , Picture Butte, Alberta

View Listing