2018 Case IH 7250 Combine

Add as favourite
Ask for price

Listing Details

AgDealer Equipment:
1407936
Stock Number:
UH6002


Category:
Harvesting Equipment
Subcategory:
Combines
Manufacturer:
Case IH
Model Year:
2018
Series:
N/A
Model:
7250

Drive Type:
N/A
Horsepower:
N/A
Separator Hours:
N/A
Hours:
1,850 hrs

Mileage:
N/A
Condition:
Used

Description:

*Luxury_cab~All Deluxe Cab Features with the addition of heated-electric remote mirrors, leather wrapped steering wheel, three storage bins behind operator's seat, five storage shelvesLH/RH "B-Posts," portable refrigerator, LH/rear windowshades, Pro 700 slide rail w/cup holder and smart phone cradle. Telematics Ready: pre wired for telematics harness and antenna included requires installation kit and modems for file transfer and RTK features
*Leather Seat Semi HT/VN~Heated and ventilated red leather operator seat and redleather instructor seat. Positive Response air suspension.
*AM/FM/WB/Bluetooth radio~4 Speaker system with 3.5mm aux. input and Bluetoothcapable radio with mic. Sirius XM satellite ready
*Variable motor HD plan w/diff~Planetary final drive with 140 cc variable displacement motor,125 cc pump
*Axle extensions-10.4 in. 265mm~For propulsion system.For use with 520, 580, and 620 duals set on 30 in. rows.Not compatible with tracks option.
*750/65R26 166A8 R1W~Goodyear, Firestone, and Michelin
*372 GPS Receiver- Omni HP/XP~Factory Installed Auto Guidance Precision FarmingIncludes: Antenna / 372 Receiver WAAS, GLONASS,Omni Star HP/XP for yield mapping.Receiver can be upgraded to RTK. RTK radio sold separately.
*Engine block heater~Cold start package (block heater)
*Trailer hitch
*Access Step - folding step that attaches to rear hitch for easy access to rear of machine only available with trailer hitch, step not recommended with 425488 dual disc spreader
*3016 pick up S/N = ?
*PowerPlus CVT drive w/feedrate~PowerPlus CVT w/Feedrate control automatically maximizes harvest productivity in varying crop conditions by adjusting ground speed to optimize crop to combine load. The PTO feeder output shaft is changed to a 21 tooth spline see header sextion, parts supplied page for conversion kits.
*HD lateral header tilt w/trap~Heavy-lift pkg. lateral header tilt control with auto level function. Includes 90 mm lift cylinders, reinforced feeder face structure.For 7240: requires HD propulsion pkg. 722775, 722776, or 425215.For 7240, 8240 and 9240: required for 35 ft. draper with Transport Package, 40 ft. and larger headers, and both the 12 Row Chopping and 12 Row Folding corn heads.For 8240 and 9240: required for 16 and 18 row corn heads.***DUAL
*Ext Wear Cone w/Std Cage~Includes heat treated transition cone and inlet castings
*Extd. wear rotor w/spikes~includes chrome alloy rasp bars throughout.For corn, soybeans and edible beans. Includes eight spikedchrome alloy rasp bars in separating area.
*Sm wire, 3/16 in.- HT, LC - Laser Clad
*Slotted~for edibile beans
*1-1/8 in.adjustable,closz slat~with 1-1/8 in. adjustable, grain slat pre-sieve
*1-1/8 in. grain slat -Elec~1-1/8 IN. ADJUSTABLE, GRAIN SLAT
*Standard elevator~For small grains - slow speed only. Not recommended for corn.
*Grain tank HC with hyd covers~410 bushel capacityIn cab hydraulic folding grain tank cover control forhigh capacity unload system.Requires HD planetry drives and axle extensions on the 7240
*HC fold unload ext 50 ft. hdrs~Folding unload auger extended wear for up to 50 ft. headsUnload length from center of machine - 34 ft.
*Pivoting unld spout in-cab adj~Electrically controlled pivoting unload spout tocontrol grain flow up to 3 ft.
*FineChpr,Windrow Chute, Dlx Spreader. Magna Cut Fine Cut Chopper, windrow Chute Deluxe Spreaders - 40 blade chopper with windrow chute, deluxe adjust spreaders ( in cab spreader distribution and right/left spreader direction controls) With manual adjust windguards.
*High definition HID lighting~6 HID lights
*Distance lights~Includes 2 additional LED lights, located onLH and RH mirror brackets.
*620/70R42 166A8 R1W Dual~Goodyear, Firestone and Michelin
*HD Adjustable steer axle~120 in. to 144 in. tread setting
*Goodyear
*Autoguidance NAV II Controller~REQUIRES AUTOGUIDANCE READY
*Engine air compressor~7 cfm @ 1,000 RPM/14 cfm @ 2,000 RPM with 16 gallonpressure tank, 4 outlet points located around the combineand a 20 ft. air hose
*Hand wash station~2.5 gallon hand wash station
*rotating brush~Rotating air screen brush for corn sucrose
































> 45 days on AgDealer

Young's Equipment Inc.

Dealer Profile