Agronic Oy WR 600 Rake

The AGRONIC WR 600 offers a larger working width, wider rotors and twice the number of tines compared with the WR 500 model. Consequently, forward speed and work rate are higher.

The frame is composed of three sections, each equipped with its own carrying wheels. The floating-mount frame design allows the windrower to independently follow the contours of the field.

Updated wing section controls, with independent electric control of the rotors, are now standard equipment on the WR 600. The wing lift and the working width adjustment now have their own separate valves, which increases the machine's operating precision. It is possible to move the rotors laterally independently. Separate control of the rotors makes windrowing easier around obstacles (stone piles, brush, telephone poles, etc.), as well as in irregularly shaped fields, along edges or on headlands.

There are three rotor control positions: left, right, or both at the same time. When doubling windrows behind a mower, the mower must have a working width less than 4.0-m (13 ft) meters, with a windrow width less than 1.2-m (4 ft.).

When mounted on a front loader, thanks to the unique design of the hitch housing and loader bracket, the WR600 is kept close to the tractor. An optional rear hitch housing can be installed to allow use on the rear hitch. The WR600 can be used with the front and rear hitch housings installed.